- Content type
- Reviews (26)
- Forum (66)
- News (4)
- Related Search
- rubber grommets
- rubber washers
- rubber fan-mount grommets
- By relevance
- By date |
- Sort :
-
Where To Buy Rubber Fan Grommets?
- Forum
Where To Buy Rubber Fan Grommets?. My Antec Sonata case came with some rubber grommets to use for attaching the fans in place of screws. Unfortunately I've used them all and now I want to swap out fans, but the grommets aren't reusable. Does anyone know where...
-
Gateway M505 display issues.
- Forum
and 6 rubber grommets at the top of the lcd display. > do i need to take out these 4+4 screws, and 6 grommets to get > to the back of the lcd display to gain access to the inverter or am > i totally off target here. > thanks again for ur help on this......
-
Antec Sonata, Continued
- Reviews
and help further reduce noise. The rubber grommets worked well: the Sonata was very quiet in operation. The two serial ATA drives that we used during the testing process did not seem that much quieter due to the presence of the rubber grommets. Overall, the...
-
Case Fan Replacement in Dell Dimension XPS R400
- Forum
probably rubber grommets, used in a good quality case (e.g. Dell or IBM) to dampen vibration, thereby reducing the noise level from the fan considerably. For me, the easiest way to remove something held in place with rubber grommets is to use a pointed...
-
Replacement case fan dell 8300
- Forum
Update:---- Yeat again dell uses non standard motherboard connectors on the motherboard. Three pin fan connector but completely differetn to a normal one. Al Archived from groups: alt.sys.pc-clone.dell () To remove rubber grommets, I use a thin screwdriver...
-
Fan Noise
- Forum
never had any problem installing them. The silencers do shift a bit but it should not be a problem. The harder rubber ones are easier to work with than the softer silicone ones. I have another solution for you - rubber grommets installed in the mounting...
-
Chenbro - Hornet, Continued
- Reviews
easy installation of the motherboard and other accessories. We found this design arrangement to be quite good. However, the upper 3.5" hard drive bay did not meet as much with our approval. Although Chenbro has added rubber grommets to absorb shock and vibration,...
-
Dim 4700 heat & noise
- Forum
Dim 4700 heat & noise. Archived from groups: alt.sys.pc-clone.dell () Specs: Dell Dimension 4700 with P4 530 and 160 GB SATA disk. The noise from the disk when moving the heads is much louder than I would like. I did change the BIOS setting to quiet...
-
i'm goin crazy! too much noise ftom the computer
- Forum
enough. Noise is coming from >hard drives too. >>regards >ale Ale, We just updated our remote recording PC with a "Tsunami Dream" case The fans and drive bays are all mounted on cushy rubber grommets which helps to keep radiated noise at...
-
Looking for a quiet case
- Forum
the frequency it resonates at. Lower frequencies are easier to dampen by rubber grommets. Look for a case with a couple of huge fans instead of way too many small ones, look for one with rubber stripping on the side panels, etc. Bear in mind, unless you're...
