which com ports to assign for modems ?. Archived from groups: microsoft.public.win95.general.discussion () The PC has a com1 (external, unused) port. An internal modem uses com3. If I install a second internal modem, which com port does it want to be assigned...

COM-port. > If I try to install the IR modem manually, I get as far as the > "Assign port" page in the wizard and come to a full stop, because > there are no ports to assign. > What do I have to do? Don't know the specifics for your laptop. In the past,...

gotten it to work temporarily before, by changing com port assignments on the modem, but the next day I have the same problem even with the new port assignment. Any way I can permenantly keep these two connections off of eachother's toes? *NOTE* browsing...

modem in my computer. I have attempted to install another device using COM ports and when I try to assign a COM port my system shows COM ports 1 through 6 all being used. When I use "Advanced System Information" to check the system it shows multiple modems...

has a block of 4 Static public IP addresses (only 2 are useable - ..233 and .234). ..233 is assigned to the modem/router, the other is for a web server. The modem/router needs to give him the ability to have a working internal (private) lan which can...

up. They sent me a Siemens Speedstream 4100 modem. I have a Linksys BEFSR41 router (wired only, 4 port ethernet). Now I can't get the router to recognize the modem. On the front of the router are LEDs for each ethernet port and the WAN port. The LINK...

there was always problem to recognize the second modem. Product info can be found at John Evrenos Archived from groups: microsoft.public.windowsxp.hardware () You would need to assign each modem an IRQ /port that is not shared with the other, I think....

assign the modem to one of the first four (or first two) com ports. If you can't do that, then Dos applications cannot use the modem. As always, you're best off using source ports such as ZDoom or prBoom. I haven't tested modem support but they will...

will let me choose the COM i want to install it to, however it does not assign the modem an IRQ setting. When i go to the control panel and click modems, then go to the diagnostics tab, then select the port that the modem is installed on and click 'more...

Make sure you use only the "retired" router's LAN ports for connecting your additional computers. You'll also need to use one of the "retired" router's LAN ports to connect to one of your main router's ports. Use a crossover cable to do this unless one of the...