Raid 0 vs raptor. hi people from tom´s hardware, the best hardware site :) I have some question about raid, and I hope you can help me with them :) 1) is raid 0 better than a raptor 10k rpm drive? 2) all info about raid 0 state that raid 0 can have...

Asus P6T V2 using RAID kills SATA DVD drive. Just built a new computer, it's a screamer! Three hard drives and 1 DVD drive are connected to SATA interfaces. Two hard drives are used as RAID 0. With this motherboard if you use the RAID controller, all SATA...

Raid 0+1 keeps crashing with new Windows 7. I am quite frustrated, since my clean install of Windows 7 Ultimate 64 bit, the raid 0+1 (AKA Raid 10) keeps crashing on the 4th drive and I have even replaced it with a brand new drive to see if it would correct...

Raid drivers for windows xp. why does bios not recognize the HDD although the PC is working fine. why does bios not recognize the HDD although the PC is working fine ...

RAID in ga-p35-ds3p. I have a Gigabyte ga-p35-ds3p motherboard with two 500GB disks in a RAID 0 config (I use the ICH9R chip for this RAID). One of the disks in the RAID seems to be bad (don't notice much more that the notice itself). I bought two new disks...

Recover RAID 5 array from failed motherboard. Hi, It appears my motherboard has died. I have an Abit IP35 Pro LGA775. This motherboard comes with an on-board RAID controller which is an Intel ICH9R Controller. I can not find this motherboard for...

Xp 64 pro installed, setup RAID 0?. Hi everyone... First let me say I am so glad I found this forum! I have read a lot of posts on setting up RAID 0 on xp 64 but I am still so very confused. Here is what I'm looking to do. I just recently bought this...

My first RAID, so I have some questions.. Hello, -The main goal is to protect my data and make the setup of a RAID and maintenance as easy as possible. -I am interested in creating a RAID to protect the data I currently have. My hardware and planned...

Can I create a RAID 1 Partition?. I have a 400gig HD and a 500gig HD. I have XP on the first and 7 on the second. I would really like to create a 100 gig partition on both and have RAID mirror the data on these partitions. That way I could have two distinct...

Windows 7 and RAID 1. i have an asus m2a7-am motherboard. i setup the raid 1 in the onboard driver by pressing ctrl+y during post. i created a raid 1 array with my two 1tb drives. installed windows 7 x64 on a separate 80gb drive. i didnt install raid drivers,...