- Related Search
- Asrock
- analogland
- chipset.People
- By relevance
- By date |
- Sort :
-
AGP Video Card Question....
- Forum
was a good board. (I'm not sure of the LA variety...) Any AGP 8x card should work, as they are backwards compatible with 4x. It appears with your board that it will work at 4x speeds only, so don't get the newest/fastest AGP card on the market, as it will...
-
Asus p5n-e and GTS 250 only displaying blank screen
- Forum
you cant see anything? Try a different card that is PCI-e 2.0 and see what happens (not another GTS 250) find what ever you can find to see if the results are different. If the other card fails to boot with your board but works on another then it is the board....
-
GT300 wins over 5870
- Forum
with (2) GTX 8800's in SLI with a monitor of 1650 X 1050 Native Resolution. Will the new ATI 5XXX card be a upgrade on my 790i ultra board? Would it work? I have sli. haha... yes it would work and it would be a pretty major upgrade, you just could never...
-
What's up with the ATI brand of boards?
- Forum
of boards so uncommon and are they any good? Pete i don't know why they choose not to manufacture they're own card but i've owned several ati cards and they all worked very well, you shouldnt be worried They do, though. The board in question is this one:...
-
Will a PCIe v3.0 vid card work in a v1.0a MB?
- Forum
1.0a compliant". Ack! Is a PCIe v3 video card backward compatible with a PCIe 1.0a MB, or am I hosed? My PS has a PCIe connector and I recently updated the chipset drivers, will this be enough to get the board to work in my system? I don't mind if it works...
-
GIGABYTE GA-MA790FXT-UD5P AM3 DDR3 AMD 790FX ATX AMD Motherboard
- Forum
the card when I hooked it up to the CORSAIR CMPSU-750TX 750W that would drain voltage on the board. When I removed VIDEO the board would receive proper voltage. Than I started smelling a tar like smell - I have worked as an electrician and have smelled that...
-
Asus P5K P35 Chipset boot problem!!!
- Forum
as you move away from the CPU. If you're SLI then remove the second video card. Remember to set the SLI Selector Card to single. Unplug the EZ plug molex from the board. Now you are stripped down to a barebones system. The PSU, the mobo itself, 1 stick...
-
Radeon 3850 AGP 8x or PCI-E 4x
- Forum
tested it in Vista yet. While possible that it doesn't work in Vista, I seriously doubt you will run into any issues. That list is a SUPPORTED CARD LIST, not a 'ONLY THESE CARDS WILL WORK LIST', meaning those are the cards that they have tested themselves,...
-
Audigy 2 Value quality or am I clumsy?
- Forum
SB) says trouble list is 1) XP, 2) drivers, 3) SB. Creative diagnostics give the card a clean bill of health. Everything works. XP says no conflicts, board works as advertised. All volumes at 90% (except for speakers - 50%) no sound for Creative, DirectX...
