this board? Is it because it's 1.65V and the board says 1.5V? ^ That memory is very much compatible with the X58... And actually that memory would work @ DDR3 1333MHz running @1.5V when installed...To get the rated speed and timings, you would have to manually...

in-line memory module. An older technology, a SIMM is a PCB (Printed Circuit Board) that typically holds 8 or 9 memory chips on a single 32-bit data bus. Typically comes with 72-pins. DIMM: Dual in-line memory module. A DIMM is a PCB (Printed Circuit Board)...

the memory timing, the memory will run at whatever speed you've set it at. Memtest86 is as good a test as ay to see if your memory still works. Be advised that by overclocking your system you've given up timing margins. Just because it works when the room...

deneb and 8 gigs of ddr3 ram. will the asus , the cpu and the memory i have work together until I can get the ddr it`s pricey. The unknown for me is really will the memory work because the board and cpu are both am3. Thanks again. Many am2+ motherboards work...

stick from a local computer store and everything has been working fine. Yep -- definately the memory. I got the new CPU back and... lo... it failed the same way. I got some cheap memory and it worked just fine on the second power on (I tell you, the first...

to actually check out the benchmarks, you will find that the memory setup on the K8W works just find. Unless you are running a NUMA aware OS (not windows), that's the way the memory works on the other board anyway. -- I either want less decadence or...

support without warranty on work or > parts. This does not bother any of us, but asking Miracle to take > this on might be asking a bit much. Sure most builds go without a > hitch, but we all know they can also turn into an elusive monster on > a whim....

being very compatible in all boards. I don't think its that, as the memory has worked previously at 100mhz with my 350 k6-2. But thanks for the tip.. I am beginning to admit that the board just doesn't work with that processor. I still wait for BiosMan...

to hear that I do indeed have a socket775 cpu. Here are my specs: PSU:unsure of the make it is a 450W it did come out of a working system though. MB: GIgabyte EP45-DS3R. Memory: 2 X 2GB OCZ DDR2-8500 GPU: ATI X1650 Pro CPU: P4 3.06GHZ LGA775 Case: Antec...