up. Expand the volume control applet and ensure the wav level >> is appropriate. >>>> Yep, I've checked both of those of course. >> The volume control on the outside is turned all the way up as is the > wave volume on the 'Master Volume' control...

It sounds as if the input stage of the DAL is being overdriven, but such is not the case, based on the input level metering for the card. The input level controls for the card driver, at least in Windows 98, do not work. The input level is fixed. It...

recorded at a good level (not pegging, but in the red.) The maximum input signal detected by the CardDeluxe was -28dB. It's like the input volume control is turned down, but there isn't one for the Windows 2000 driver, that I can find. Archived from...

I suppose there's always the amp's power switch if my computer goes nuts and I need to cut the sound. Otherwise, it looks like I'm using the windows volume control (which I admit is a bit of a pain, but if it will save me the cost of a preamp, I can live...

inline volume control, and my vib is @ 10) This made a nice improvement that I thought worthy to pass on, and contrary to some of the "do not have windows volume above 50%" information out there...Give it a try yourself. -Brodyhill ^ thanks man, is there...

to the newly bounced/effected signal. Have you tested all of the analog outputs on the motu? or just the main outs? I had a problem with an 896 right out of the box where the left channel was noisy (white noise masking the sound), and the right channel...

Their products have some quirks. When they work, they work really well. If they have conflict with something in your system then they are useless. I have never had a conflict/driver problem on any of my own PCs but I have seen the problems before. I had...

check-box to make its volume control appear. There's no line-in check-box to be checked. I'm beginning to suspect it is some kind of bug and I have to reinstall xp of whatever... :-( irma > Open volume controls (not just master) > Options: > Select...