Same connection problems with Netgear Wireless LAN. Archived from groups: microsoft.public.windows.networking.wireless () I use a WGT 624 router and a WG 311 wireless network card. Under XP SP2 (I did not use the equipment before the SP2 installation) wireless...

i want to play crysis. All clock speeds are standard now and almost always too. My problem is this - i need to wirelessly access my router for internet access and i'm using a netgear WPN111 USB type connector. Now, i can generally browse and shop for example...

had this problem with my Intel Pro 2100 3b wireless> card and linksys router... network was working fine, and right after > installing SP2, my wireless would not work any more. I have seen many > other people in this group that have had similair problems....

Wireless Problem - - Netgear WGR-614 - - No Wireless Access!. Archived from groups: alt.internet.wireless () I have had quite a few problems getting my Netgear to connect with my D-Link router. However thanks to soem help I now have a connection. The...

the other wired computers must still router through the Netgear Wireless to access the internet. I tried again for a while, but the belkin still randomly seems to reset itself, but with the wireless pcs using the Netgear they do not disconnect from the wireless,...

works when hard wired to the PC but momment I go wireless the whole thing stops communicating. Two other machines have wireless Netgear cards also have this problem. All nodes running xp pro. I get round this by incorporating a Netgear wireless access...

address range of 192.168.1.21 - 192.168.1.23. The laptop gets an address via DHCP of 192.168.1.21 from the Netgear with no problem. I can also login to the Netgear router via wireless without problem. I am not sure which port I should use to connect...

XP PRo, and a laptop running Windows Home edition with a built in wireless card (LAN Express AS IEEE 802.11g, running a netgear router (802.11b). I had always used a netgear wireless card with my old IBM windows 2000 computer no problem, but i'm getting...

into the computer. My Gateway 300S is in the hamshack connected to the wireless router via Netgear PCI card; the Gateway 200X notebook is using a Netgear PCMCIA card. All the wireless stuff is working just fine. Even my Dell Axim X50v can access the internet...

I've connected a netgear wireless router to a d-link wireless router, with the d-link assigning an ip address to the netgear. I had to manually asign the DNS server IP addresses in the netgear, but other wise I could access the net wirelessly via either...