Gigabyte GA-P35C-DS3R and Intel Core 2 Duo E8400 Wont Post - Help Need. I really hope someone can help... I am running a Gigabyte GA-P35C-DS3R motherboard with an Intel Core 2 Duo E6600 processor and its runs happily without any problems. However I wanted...

New AMD System Won’t Post– HELP!. Greetings all! I finally decided to take the plunge and dive into an AMD system – I have always been an Intel sheep before :) I received my online component order yesterday and proceeded to put my dream machine together....

post didnt make sense, i know a lil about computers but im not a guru by any means =/ thanks in advance for the help, and sorry for the long post, i just wanted to get it all down at once.. hey folks, new member, so first off hello =] heres my specs. mobo-...

RAID 0 drive won't post. Please help... I have 2 WD GREENS RAID 0 on my system. I tried to repair a windows xp image restore on the RAID 0 sets using the windows XP installation disk. it ran fine then on reboot the RAID bios post didn't respond. now my...

but I can take the 667 out of my machine and install the 800 and it won't post . I even went in and manually changed the voltage and the settings and still no post but when I insert the 667 it will post right away. That's why I wanted to know if the problem...

a link to the breadboarding post in a post dated 03/07. I could move some of that info into the OP if you think that would help. I think this should be put in the first post so people don't have to hunt for it, its very good stuff. People might not see it...

computer post problem. I have been computer for years and I have had problems in the past, but this one is driving me crazy. Can anyone help with some solid suggestions. I have all new components in this new computer I just built it won't post. I have change...

an idea what the problem here is? Thanks, - Norm It's possible that one of your components is DOA. How does the beeping go? Check out this guide for more info: New computer won't POST may help. Your procedure looks good - the first thing I'd try at...

help either. Does anyone have any ideas of how I might go about troubleshooting/fixing this? I'm not sure what to do if I can't even get the POST. Any help would be greatly appreciated. Thanks in advance! I would remove the board battery for a few minutes...

for a precedent of importance that doesn't really exist anyway. Do a search on your post for the last weeks.... If you can't see it there, you'll never see it...... I have 3000 posts in the last few weeks :oops: You can't possibly expect me to find one post!...