the same coolers should work right? It's just that I can't seem to find any AM3 specific coolers, so I just want to make sure that it would still work to use an AM2+ cooler. And just as an extra question, do you think the fan that the AMD Phenom II X4 comes...

1) take off the cooler and clean the GPU with alcohol. Regrease and put back on. You will have to watch not to get the RAM cooler pasties dirty. 2) if that does not work RMA it, it is not right. The VF1000 is what I would consider an average cooler as far...

the Thermalright Ultra-120 Extreme 1366 RT CPU Cooler for $59.99 The Noctua NH-U12P SE1366 Ultra Silent CPU Cooler or $67.99 Or the Cooler Master RR-UV8-XBU1-GP V8 Heatpipe CPU Cooler for $69.99 All above 3 CPU HSF Coolers' will work with your board...

to give it back - I could get a cooler like the Arctic Cooling Accelero S1 (http://www.overclock.co.uk/product/Arctic-Cooling-Accelero-S1-VGA-Cooler_5966.html) to make it cooler... but how do I know this will definitely work? My card is way hotter than other...

and quietly. cooler (comes with ramsinks) for the mosfets (which I would strongly suggest) 3pin to 4pin adapter (for fan controller) what it looks like benchmarks Some people dis-agree with this cooler but it works, has a proven track record, is...

at least I can find thing really fast. This is supposed to be a great cooler for the 8800GT here's a nice little review comparing 7 coolers for the 8800 GT. You can use AS5 for the gpu, it will work on gpu's, cpu's, and even chipsets. But most...

I5 and i7 cpu cooler. do the socket LGA 1366 aftermarket cpu coolers work on an lga 1156 CPU socket?. do the socket LGA 1366 aftermarket cpu coolers work on an lga 1156 CPU socket? Only ifthe HSF you buy has mounting brackets for each socket - as the two sockets...

for a VGA cooler ... the problem is on newegg.com they dont list which cards are compatible with each cooler ... any recomendations ? and which coolers will work with my card ... . my graphics card fan sounds like a vaccum when i start my pc i wanna replace...

do twist a bit if you want it to. Thanks, I did not want to over tighten it, but I wanted to make sure I had good enough contact for the cooler to work. This is my first after market cooler I have ever installed. So you meant the heatsink, a little movement...

like intel burn test, prime 95 then the stock cooler might not be a good option. Also i would recommend you in investing in a decent cpu cooler. 35$ can buy you a cpu cooler that will work with many sockets and perform excellent. Scythe MUGEN-2 SCMG-2000 is...