State of California sues 3D printer filament company Polymaker for promoting ghost guns by marketing to 3D-printed gun community — state alleges company turns harmless PLA filament into a regulated 'firearm precursor part'

a 3D-printed gun
(Image credit: Getty Images)
20

California is taking another swing at banning 3D-printed “ghost guns,” and this time the target is one of the world’s largest manufacturers of 3D printing filament. Polymaker LLC, headquartered in Shanghai with U.S. operations based in Houston, was named in a civil lawsuit filed October 5, 2026, by San Diego County Counsel on behalf of the People of the State of California. The complaint alleges that Polymaker marketed its filament in such a way as to appeal to gun enthusiasts and thus transform harmless PLA into a regulated “firearm precursor part.”

Under California law, a firearm precursor part is “defined to include any article marketed or sold to the public to become or be used as the frame or receiver of a functional firearm once completed, assembled or converted,” according to the civil complaint filed in San Diego County Superior Court. The County seeks disgorgement of profits, civil penalties and injunctive relief.

Latest Videos FromTom's Hardware
Denise Bertacchi
Freelance Reviewer

Denise Bertacchi is a Contributing Writer for Tom’s Hardware US, covering 3D printing. Denise has been crafting with PCs since she discovered Print Shop had clip art on her Apple IIe. She loves reviewing 3D printers because she can mix all her passions: printing, photography, and writing.

  • Eury
    But we the people have the right to manufacture personal firearms... Its not illegal, even tho the media and California try to make people believe that it is illegal
    Reply
  • fullysemiproblematic
    Lol now I'm going to produce short-barrelled ghost guns with suppressors and there's nothing you can do about it
    Reply
  • Kindaian
    Doesn't that goes contrary to all kinds of rights that the companies do have? As in freedom to trade?

    Not sure, but looks like this kind of legislation is getting used for all kinds of nefarious effects. Are they going after all filament manufacturers in the world next, just because it's possible to do something with it that they don't like?

    Where does the line stand then?
    Reply
  • Why_Me
    California's priorities are all messed up.
    Reply
  • BigDaddyDK
    Why_Me said:
    California's priorities are all messed up.
    California's priorities are all messed up.

    This seems to capture it just a bit more accurately.
    Reply
  • morganjeremiah7
    Next I guess they will ban copper mines who sell to ammunition makers.
    Reply
  • TechieTwo
    Until the clueless acknowledge that criminals are the problem, not the device they use to attack victims, the insanity will continue. If the device was the REAL problem, then society would need to ban everything that can be used as a weapon from a baseball bat to an airplane and everything in between. Only the illiterate and those in denial believe that guns are the actual problem.
    Reply
  • drivinfast247
    Admin said:
    The newly formed Consumer Fairness and Public Protection Division ...
    I wonder how many billions of taxpayer dollars that will laund...er, I mean waste.
    Reply
  • SomeoneElse23
    TechieTwo said:
    Until the clueless acknowledge that criminals are the problem, not the device they use to attack victims, the insanity will continue. If the device was the REAL problem, then society would need to ban everything that can be used as a weapon from a baseball bat to an airplane and everything in between. Only the illiterate and those in denial believe that guns are the actual problem.
    One side of the political world is a master of verbal manipulation. Repeat the same lie often enough, and the weak minded start to believe it, and even repeat it.
    Reply
  • EntropyWorks
    Washington State passed it's own nearly impossible to enforce law: House Bill 2320 (Signed March 24, 2026)

    Prohibits using 3D printers and CNC milling machines to manufacture untraceable "ghost guns," firearm frames, receivers, or machine-gun conversion devices unless you hold a federal firearms license (FFL). It also restricts possessing digital firearm manufacturing codes with the intent to print them illegally.

    You cannot lawfully manufacture an untraceable, home-built firearm for personal use in Washington State, regardless of whether you use a 3D printer, a CNC machine, or traditional hand tools (like a drill press, files, or a jig)

    Lawmakers purposefully included a catch-all phrase. It states it is unlawful to knowingly or recklessly manufacture a firearm frame or receiver using a 3D printer, CNC machine, "or by other means," unless you hold a Federal Firearms License (FFL).

    Surely this will stop gun violence. How about passing free health care and education? Real change takes more than passing laws that are basically worthless.
    Reply