Sandisk has launched the NAS 600 SATA and NAS 800 NVMe series of drives to compete with the best SSDs on the market. However, as their names insinuate, these SSDs target a specific niche: NAS devices. The Sandisk NAS 800 7.68TB, the highest-capacity drive of the lot, flaunting an endurance of 14 PBW, will retail for a whopping $2,199.99.
Despite the fact that we are in the middle of a global storage shortage, Sandisk has remained one of the busiest companies in the storage industry. Having previously released the Sandisk 320 and 520 SATA SSDs, the company is back again with two new SSD lineups. The NAS 600, which sticks to the conventional 2.5-inch form factor, and the NAS 800, which uses the M.2 2280 form factor, target prosumers, professionals, and businesses that need an SSD for their NAS devices.
NAS users typically rely on hard drives because of their affordability and high storage capacity. However, SSDs are a valid alternative to traditional mechanical drives, offering higher transfer throughput. Sometimes, users deploy SSDs as performance accelerators alongside hard drives. But since NAS devices operate 24/7 and are constantly writing lots of data to the drives, you need SSDs with high endurance, and that is where the Sandisk NAS 600 and NAS 800 come in.
The Sandisk NAS 800 boasts some of the highest endurance ratings ever seen on a NAS SSD. According to Sandisk, the drive is officially rated for 14 petabytes written (PBW) over its lifespan. Under a five-year warranty, users can write up to 7.67TB of data to the drive each day. It translates to an impressive 1 Drive Write Per Day (DWPD), meaning users can fill and rewrite the drive’s entire capacity daily for five consecutive years.
Sandisk NAS 600 and NAS 800 Specifications
SSD |
MSRP |
Capacity |
Sequential Read (MB/s) |
Sequential Write (MB/s) |
Random Read (MB/s) |
Random Write (MB/s) |
Endurance (TBW) |
|---|---|---|---|---|---|---|---|
Sandisk NAS 800 |
7.68TB |
14,900 |
13,000 |
2,200,000 |
2,100,000 |
14,000 |
|
Sandisk NAS 800 |
3.84TB |
14,900 |
13,100 |
2,300,000 |
2,000,000 |
7,000 |
|
Sandisk NAS 800 |
1.92TB |
14,900 |
13,200 |
2,300,000 |
1,500,000 |
3,500 |
|
Sandisk NAS 800 |
960GB |
14,900 |
11,000 |
1,600,000 |
800,000 |
1,750 |
|
Sandisk NAS 600 |
4TB |
560 |
520 |
86,000 |
77,000 |
2,500 |
|
Sandisk NAS 600 |
2TB |
560 |
515 |
87,000 |
76,000 |
1,300 |
|
Sandisk NAS 600 |
1TB |
560 |
515 |
87,000 |
75,000 |
600 |
|
Sandisk NAS 600 |
500GB |
560 |
505 |
74,000 |
74,000 |
350 |
To put these endurance numbers into perspective, consumer SSDs typically top out around 2,500 TBW, while NAS SSDs sometimes hit 5,000 TBW. The Sandisk NAS 800's impressive endurance numbers put the drive in the same category as enterprise SSDs with crazy endurance ratings over 10,000 TBW. For comparison, the Seagate IronWolf 525, which may be a bit outdated, tops out at 2,800 TBW for its 2TB capacity. In contrast, the comparable Sandisk NAS 800 1.92TB SKU boasts a remarkable 3,500 TBW, representing a 25% higher endurance.
We reached out to Sandisk to inquire about the SSD controller and NAND used in the new NAS 600 and NAS 800 SSDs. While Sandisk has not gotten back to us, we have a fairly good idea of how the company achieved the impressive endurance figures.
Assuming the standard 8TiB of physical NAND behind the 7.68TB user capacity, effective Over-Provisioning (OP) works out to roughly 14.5%, significantly higher than roughly 7% to 10% inherent in consumer drives. Assuming the SSDs use Sandisk 3D TLC NAND with ratings around 1,800 to 2,000 Program/Erase (P/E) cycles, the math implies a Write Amplification Factor (WAF) near 1.16X. However, if the NAND is closer to 3,000 PEC, the rating carries proportionally more margin.
Get Tom's Hardware's best news and in-depth reviews, straight to your inbox.
View Original
View Original
Outside of impressive endurance, the Sandisk NAS 600 and NAS 800 deliver performance that you would expect from SATA III and PCIe 4.0 drives. The former offers sequential read and write speeds up to 560 MB/s and 520 MB/s, respectively, whereas the latter maxes out at 14,900 MB/s and 13,2000 MB/s, respectively. We suspect Sandisk has optimized the firmware for NAS workloads.
Sandisk's new SSDs will not come cheap, as expected for any SSD launched during a storage shortage. The NAS 600 starts at $179.99 for the 500GB but quickly scales to $999.99 for the 4TB SKU. Meanwhile, the NAS 800 960GB and 7.68TB will cost $309.99 and $2,199.99, respectively. Both series come with a limited five-year warranty and will be available for purchase in September.
Follow Tom's Hardware on Google News, or add us as a preferred source, to get our latest news, analysis, & reviews in your feeds.
Zhiye Liu is a news editor, memory reviewer, and SSD tester at Tom’s Hardware. Although he loves everything that’s hardware, he has a soft spot for CPUs, GPUs, and RAM.