Packaging, Physical Layout, And Accessories
BenQ's double-corrugated carton is generously-sized and protects its contents with three large blocks of Styrofoam. Part of the packaging is a pizza-style box that contains a light-blocking hood.
The PG2401PT comes with a large complement of accessories and cables. For connectivity you get VGA, DVI, and mini-to-standard DisplayPort. An IEC power cord hooks up to the internal power supply, and there’s a USB 3.0 cable bundled as well. BenQ also includes the aforementioned hood to block out ambient light; more on that below.
The upright snaps onto the back and the base screws on using a captive bolt. No tools are required for assembly. A small headphone hook attaches to the back of the upright to help with cable management. Setup help is provided in the form of a quick-start guide and DVD, which contains the user manual and Palette Master calibration software.
There is very little plastic to distract you from an extremely clear and sharp image thanks to a thin 18-millimeter bezel. The picture's clarity is at least partly attributable to BenQ’s light anti-glare layer, which exhibits no grain or texture at all. As we assembled the base, we couldn’t help but compare its design to the floating Recognizer tanks from the movie Tron. The upright has a large hole with a spring-loaded guillotine inside to keep your cabling neat and tidy.
The PG2401PT includes a very high-quality light hood that snaps in place. It’s completely rigid and does a superb job of blocking reflections from the sides and top of the panel. You can see in the photo that there is a cutout for your calibrator’s cable. The i1Pro 2 in the picture is not included.
The touch-sensitive controls are in the lower-right corner of the screen. When you tap any of them, a menu pops up. The first four buttons can be programmed with options other than the ones shown. The fifth button brings up the full on-screen display.
Any monitor worthy of professional billing must have full ergonomic adjustment, and BenQ's PG2401PT satisfies that criteria. You can rotate the panel to portrait mode with an automatic image and OSD flip. You get six inches of height adjustment, along with 90 degrees of swivel and 25 degrees of tilt. All of the movements are smooth and firm, reflecting the display's excellent build quality.
We all know how impressive a 27-inch screen looks in portrait mode. But in practice, it's awkwardly tall. A 24-inch 16:10 monitor is actually superior in terms of ergonomics. Document editing and Web browsing are much easier. You save the extra scrolling and you don’t have to move your head up and down to see everything.
Two USB 3.0 ports and a media card reader are on the left side. The reader is extremely handy, and we’ve only seen it on one other display (Asus’ PA279Q). On the thickness scale, the PG2401PT measures a rather portly 2.7 inches. The little hook on the back of the upright is intended as a headphone hanger. You can remove it if you wish.
There’s plenty of ventilation around the panel’s back side. If you remove the upright, a 100 mm VESA mount is exposed. Since it’s perfectly flat, the monitor is a good candidate for wall-mounting.
You can connect nearly any video source to the PG2401PT thanks to its well-stocked input panel. VGA is becoming a rarity on modern displays, but BenQ provides a D-sub jack anyway. Also present are HDMI 1.4, DVI, and two DisplayPort 1.2 inputs, one of which employs the mini interface. On the far right, you'll find a USB 3.0 upstream port. The downstream connectors are on the left side of the bezel.