FC-PGA Pentium III on Celeron PGA370/Slot1 Converter Cards

Getting An Socket370/Slot1 Adapter Card Ready For FC-PGA Coppermine - The Practice

The operations I did on my Asus S370-card were very simple. First I set the jumpers to 1.65 V.

Then I took an old floppy ribbon cable and removed a short part of one of the wires. This wire is perfect for such operations. Then I simply soldered a connection between AH4 and X4:

This is all that needs doing on the card if you don't fancy the pull-down operation as I did. PLEASE DON'T FORGET TO TAKE THE PROCESSOR OUT OF THE SOCKET WHILE SOLDERING OR MANIPULATING !!!