Skip to main content

System Builder Marathon: $500 Gaming PC

Motherboard And Memory

Motherboard : Gigabyte GA-EP35-DS3L

If we hope to maximize our speed and performance, we need to choose a motherboard that is overclocking-friendly. With a comparable P45 motherboard still out of reach, we chose Gigabyte’s all-solid-capacitor GA-EP35-DSL motherboard. It’s light on features compared to more expensive motherboards, but its proven performance, stability, and design made this P35 motherboard an excellent option for our entry-level system.

Read Customer Reviews on Gigabyte’s GA-EP35-DS3L

Memory : Wintec AMPO PC2-6400

Read Customer Reviews on Wintec’s AMPO PC2-6400

It would have been nice to get 4 GB of memory into the entry-level system, but this would have come at the expense of too drastic a sacrifice elsewhere. Even 2 GB of high-performance memory was out of reach without factoring mail-in rebates into the totals. The attractive price of this 2 GB kit of Wintec AMPO PC2-6400 was just what we needed for this month’s system. This basic RAM has SPD timings of 5-5-5-15 at DDR2 800 speeds and is rated at 1.8 V.

  • radguy
    Thanks for the article. I always enjoy these sbm builds you guys do. I guessed wrong again but actually think you guys picked a better choice. Nice to know build quality is still taken into consideration even at the 500 dollar range. Also just to mention this again next time noise and power consumption charts please.
    Reply
  • "The silicon hard drive grommets"

    That wouldn't dampen much noise.

    Try silicone hard drive grommets
    (They are usually silicon-oxygen based polymers)
    Reply
  • slomo4sho
    I wish you used the E5200 CPU for this build, current prices reflect a difference of $14 only.

    Also, in the future, would it be possible for you to have two builds for the $500 budget build. One based on Intel AND the other on AMD?
    Reply
  • xx12amanxx
    I would have spent maybe 30$ on a cheapo case and put the 50$ toward's a hd4850! Most people building a 500$ pc are going to want maximun performance and not care what the case looks like.
    Reply
  • cangelini
    xX12amanXxI would have spent maybe 30$ on a cheapo case and put the 50$ toward's a hd4850! Most people building a 500$ pc are going to want maximun performance and not care what the case looks like.
    $30 for a case and PSU? Sounds like a build asking for trouble. I personally don't think $80 for a nice chassis and power supply is bad.
    Reply
  • cangelini
    Slomo4shOI wish you used the E5200 CPU for this build, current prices reflect a difference of $14 only. Also, in the future, would it be possible for you to have two builds for the $500 budget build. One based on Intel AND the other on AMD?
    Heya Slo! We're actually weighing the possibility of simply switching off each month on the $500 system since AMD has some very compelling hardware in that range.
    Reply
  • slomo4sho
    cangeliniHeya Slo! We're actually weighing the possibility of simply switching off each month on the $500 system since AMD has some very compelling hardware in that range.
    Well in this case, an AMD build might have allowed for a 4850. I look forward to seeing what you decide upon but I still think a monthly build of each platform at the $500 build is definitely something worthwhile.

    Transitioning month to month between the two usually does not allow for comparative annalist in your "Performance And Value, Dissected" write-ups
    Reply
  • cangelini
    Slomo4shO
    Gotcha. We'll discuss that as a possibility, then.
    Reply
  • lounge lizard
    I love the article and second the notion that it would be a great idea to run it every month. I for one am a firm believer of upgrading more consistently at a reasonable cost per component rather then just throwing $1500 at new machine.

    At some point it would be interesting if you guys could run an Upgrade Edition of the $500 system builder. Most people that have the courage and knowledge to overclock their new parts by over 50% (wow the E2180 rocks!)would almost definitely have components that they could and would want to swap between rigs.

    Again, great article.
    Reply
  • reasonablevoice
    king_edgar"The silicon hard drive grommets" That wouldn't dampen much noise.Try silicone hard drive grommets(They are usually silicon-oxygen based polymers)
    What the hell are you saying?
    Reply