Skip to main content

Intel P45: The New Chipset Lacks Progress

Performance Benchmark Results

Although Intel officially supports only 1333 MHz FSB speeds, many motherboard manufacturers decided to support 1600 MHz settings as well, so we benchmarked both. In an effort to directly assess the performance difference, we reduced the Core 2 Extreme Q9770’s core clock speed from 3.2 GHz to 3.0 GHz, as this would allow running 3.0 GHz either at 1333 MHz or 1600 MHz.

We selected DDR2-800 memory at CL4-4-4-12 timings for all benchmark runs. Please note that the X48 motherboard we used utilized DDR3 memory, so we had to switch to DDR3-1066.

We ran all benchmarks at least three times, and used the average result of all benchmark runs. As you will see, there is no clear performance winner, as the differences are too small. This includes the enthusiast X38 and X48 chipsets, as well as the mainstream P35 and P45 chipsets, and 1333 MHz versus 1600 MHz—the effective difference is close to zero.

3D Benchmarks

intel p45 chipset

Prey delivers slightly faster frame rates when running on a host system that operates at 1600 MHz speed. However, the difference is too small to justify purchasing an expensive X48 motherboard over one using P45 or P35, unless you want dual x16 PCI Express 2.0 graphics.

intel p45 chipset

We only use Quake 4 for platform benchmarks as it is not graphics limited due to its outdated graphics feature set. As a consequence, the platform typically creates the bottleneck. Here you can see that 1600 MHz does make a difference, but again the performance benefits are really small.

intel p45 chipset

Different benchmark, same results: there are only minor performance improvements for 1600 MHz over 1333 MHz bus speeds.

intel p45 chipset