X48 Motherboard Comparison, Part 2

Hard Drive Performance: H2benchw

We tested the third-party controller of each motherboard against the on-chipset RAID capability of the ICH9R, to see how each component performed. ASRock got left out, since it had no third-party SATA controller, while ECS was forced to run a single drive due to its single port.

x48 motherboard comparison

Three of the motherboards tied for access times, while DFI’s implementation of the JMicron JMB363 somehow fell slightly behind.

x48 motherboard comparison

Who would have thought that Marvell would take the lead away from JMicron in bandwidth ? Intel’s solution finishes far ahead.

x48 motherboard comparison

Intel’s solution reads the fastest…

x48 motherboard comparison

…and writes the fastest, too.

Thomas Soderstrom
Thomas Soderstrom is a Senior Staff Editor at Tom's Hardware US. He tests and reviews cases, cooling, memory and motherboards.
  • nihility
    I thought the major concern with overclocking was doing it with 4 GB or 8 GB of memory installed and with quad cores.
    Buying an overly expensive high end motherboard but installing a 65 nm dual core processor and just 2 GB of RAM seems a very odd combination to me.
    Reply
  • @ni

    Not so odd if you want to get the base foundation set up and then wait for lower prices on higher performance parts later on down the road.
    A quad core (3.0 GHz x 4) chip is coming down the pike by years end and DDR3 prices are on the slide. Building an E8400 / 2 GB base machine is exactly what I did to finally migrate from my 5 year old P4 Extreme Edition / Intel 875 based rig.

    That's the beauty of the X48 platform; longevity.
    Reply
  • The ECS offering has supposedly been out for around a month, but I can't find it for sale ANYWHERE!! can't even find a price. I used to turn my nose up at ECS products. Our company used Asus boards exclusively thinking they were a higher quality product. Evey one of our Asus boards failed within 4 years. This may be because the Chinese have studied the American business model... Make a product that is designed to either fail or need parts within a calculated period of time. ECS are much cheaper, and so far seem more stable than the Maximus Formula board we purchased recently. The Asus BIOS is for people who like to toy with settings. Unfortunately their BIOS has become complicated beyond their programmers ability too write stable code.
    Reply
  • Glad to see that gigabyte's board was so much more energy efficient than Asus', or any other board for that matter... especially while overclocking
    Reply
  • Fedor
    Arcolyte - lol. Did you fall asleep and dream up another page of the review which had power consumption whilst overclocking? :p

    For the record I'm using my first Gigabyte board (X38-DQ6) and overall I'm pretty happy with it, but having said that I haven't used Asus in at least 5 years. With these comparisons it often comes down to features since performance is pretty near (although the low memory speeds achieved by the Gigabyte surprised me!).
    Reply
  • " Intel covers all of its CPU VRM MOSFET?s with sinks. Our apologies for the alphabet soup that made up the last comment. " -> You could've gone with " Central Processing Unit Voltage Regulator Module Metal?Oxide?Semiconductor Field-Effect Transistor's " , so it's ok =)
    Reply
  • frodbonzi
    I wonder how the Asus' Rampage Formula stacks up here? It supports DDR2 or DDR3 and is part of the RoG line... X48 as well...
    Reply
  • xanxaz
    asrock rocks....lol...although i'll keep my gigabyte... as i dont know where to say this, it's better say it here... your main page is eating my cpu cycles... between 25% up to 50% cpu utilization while viewing your site? please cut down in animated ads... running a c2d at 3.6 and still lags while surfing... dah... it's just your site... os is it me? i think it's the ad on the top right corner that is causing that...
    Reply
  • wozeus
    I see that Newegg has ECS X48T-A for under $200. Looks like it's a great deal...going to get one.
    Reply