Need help with Case Fans & AIO Cooler connections to Mobo

Toggle sidebar Toggle sidebar
EzTec

EzTec

Distinguished
Dec 25, 2013
421
2
18,815
tinyurl.com
New build in a H200i Mini ITX & im trying to figure out if I need any additional fan hub... a fan splitter... or is the Asus ROG Strix Z370-I enough to connect everything I have listed below?

AIO Deepcool Captain 240EX 2 (4 Pin) Fan connectors & 1 (3 Pin) Pump connector

Exhaust fan AigoDIY White 120mm (3Pin) fan connector or (4pin) Molex? not sure if i should get a pwm instead?

120mm top of case (other intake) (4pin connector)

In short we have 4 Fans & 1 Pump connector... Also the H200i comes with some sort of Smart device fan hub & the AIO also includes some sort of additional fan hub as well I think i should be good???
 
Solution
scout_03
recheck case and board specs first case ould hold on top and back fan with a dual aio cooler in the front then motherboard have one cpu one system fan and one aio connector so where you gone put all others fans also this case look like it come with a top and back fan in .
Sort by date Sort by votes
scout_03

scout_03

Titan
Ambassador
Feb 18, 2010
30,566
321
107,640
recheck case and board specs first case ould hold on top and back fan with a dual aio cooler in the front then motherboard have one cpu one system fan and one aio connector so where you gone put all others fans also this case look like it come with a top and back fan in .
 
Upvote 0 Downvote
Solution
EzTec

EzTec

Distinguished
Dec 25, 2013
421
2
18,815
tinyurl.com


Well that's the thing.... the case comes with a Smart Device in the back of the case that's supposedly has "According to their website a direct copy" **3 x Fan channels with Max 10W per channel output*
1 x RGB LED port support up to 4 x HUE+ LED strips or 5 x Aer RGB fans**

& The AIO Cooler comes with another fan hub a 4 connector hub.... I just dont know how to connect all of this and I dont want to fry something... or if i need to buy a splitter etc... idk

The motherboard has:
1 x CPU Fan connector(s) (1 x 4-pin) ~ Not using a Air cooler so i guess just maybe one of the fans? or connect a splitter from this for the hub?
1 x Chassis Fan connector(s) (1 x 4-pin) Same thing here...
1 x AIO Pump Header (1 x 4-pin) ~ This is pretty self explanatory lol

Hmmm...... interesting they seem to have made this case cheaper (2nd Model) by removing the smart device from the unit... that's kinda of a plus I think.... in that regard wouldn't I only need a fan splitter for all the fans? or a hub like the one that comes with the AIO
 
Upvote 0 Downvote
scout_03

scout_03

Titan
Ambassador
Feb 18, 2010
30,566
321
107,640
i would check the cooler install manual before getting the back case fan since you need this in the case to use it https://sta3-nzxtcorporation.netdna-ssl.com/uploads/download/attachment/708/Aer_RGB-manual-092116-ver2.pdf so check if you have ll parts before getting any others parts since the board only have one system it will be need for this device the could be use for the hub hat come with cooler should be use for is fan since you could not find many detail on the net that the best i could do not .
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom