- Mar 16, 2018
- 3
- 0
- 10
I’m putting together a water cooling rig in my pc and I will be doing a push,pull set now my question is do I do High static pressure fans for the pushing part or for the pulling part or both?
Need help whith water cooling
- Thread starter heyitsace02
- Start date
Solution
- Jul 18, 2014
- 21,771
- 1,935
- 93,640
I would use the same fans for both but if your going with more then a few fans I would make sure there under 20 dbA as anything above can get quite noisy.
lumineZ
Honorable
- Jul 25, 2017
- 1,803
- 21
- 13,165
Can you answer a couple of questions mate?
1. What kind of radiators are you using?
2. What kind of hardware are you cooling? What kind of CPU? and if you are cooling the GPU(s) what kind?
3. What kind of case do you have?
And to answer your question: Use SP fans on both sides. Now this also depends on what kind of radiator you have to be honest.
1. What kind of radiators are you using?
2. What kind of hardware are you cooling? What kind of CPU? and if you are cooling the GPU(s) what kind?
3. What kind of case do you have?
And to answer your question: Use SP fans on both sides. Now this also depends on what kind of radiator you have to be honest.
Latest posts
-
-
-
-
-
-
Question GPU fan seized up, it doesn't even spin when tapped with finger ?
- Latest: Rokinamerica
-
Facebook
Twitter
Instagram