About Today's Catch
Some of you asked for a professional-grade surge protector tear-down when I started taking these apart nearly a year ago. Well, that time has come.
I poked a handful of manufacturers back in February to see if any might be interested in sending samples, got a bite from Electronic Systems Protection, received its SA-1810 in April and now we get to go in for a tour. The SA-1810 is ESP/SurgeX's entry-level offering with the most built-in outlets.
If the brand name sounds unfamiliar to you, you may be shocked by its $400 street price and be curious to find out why it is so expensive compared to typical surge suppressors.
For people who have no idea who ESP is, the company originally started doing power conditioning for office equipment in 1985 when power quality issues were causing abnormally high service call frequency on the first generations of electronic copiers and other equipment. As for SurgeX, the company started in 1995 by introducing the concept of series-mode protection using non-sacrificial surge clamping components, which are still the two main features it's known for today. ESP bought SurgeX in 2010, so I'll be using SurgeX, ESP and ESP/SurgeX interchangeably.
SurgeX Technology Overview
The full SurgeX solution is divided into five stages; its SA-1810 implements only the first three, which also happen to be the most important under normal circumstances. Those are:
- the SurgeX reactor, intended to block high-frequency surge components
- the surge elimination circuitry, which replaces the MOVs from regular surge protectors
- the EMI filter
From this, we can expect the insides to be partitioned in three functional sections in one way or another. On the infographic, stages one and two together form SurgeX's Advanced Series Mode (ASM) protection.
The two functions not included are the Catastrophic Over/Under-Voltage Shutdown (COUVS) protection, which disconnects everything in case of an abnormal voltage condition, and Inrush Current Elimination (ICE), which sequentially turns outlets on via inrush-limiting elements to mitigate inrush current.
The SurgeX Claim To Fame
A quick glance at this other SurgeX infographic highlights the following three key points:
- the series nature of the primary protection
- the non-sacrificial nature of the protection's design
- the non-contamination of the ground voltage
The first two have already been hinted at earlier, while the third simply means that the protection scheme does not involve the ground wire. We will get to what these translate to in terms of hardware later when the lid pops. For now, onward to the exterior tour.
To paraphrase: good things come in inconspicuous packages. There's no fancy marketing here, not even a model number. Just the SurgeX brand name and company motto. People who order SurgeX units simply do not need to be reminded why they are doing so by colorful or wordy packaging. They already know, buy it based on recommendations without caring about cost or are obeying a procurement requirement.
A “fragile” power strip? Hm.
Inside The Box
ESP does not chance its unit getting mangled during shipping. About three centimeters of stiff foam pad the unit away from its light corrugated cardboard box on every side at both ends. This makes me wonder what the “Fragile” sticker was about.
How difficult can setting up a SurgeX unit be? About as difficult as plugging in any other surge protector: plug it into a power outlet, then plug in your devices. The LED chart on the back of this 8.5x5.5” sheet may seem intimidating until you realize it covers 11 different product lines, one product per row. In the case of this “Standalone” product, the only LED is green, and a light means there is power and the protection is working. When it's off, there is either no power or the protection failed.
Traceability is always nice to have, especially on premium and potentially mission-critical products. The assembly and test slip included with the unit I received indicates that at least three people directly handled the unit. Based on the slip date, it appears this unit was assembled and presumably tested a few days before my first attempt to contact SurgeX.
Foam blocks, the unit itself, the instructions half-sheet and the checklist. That is it for package contents. To be fair, I doubt many people really care for more than that anyway.
Outlets, Outlets And More Outlets
Ten yellowish-orange outlets adorn the SA-1810's top, leaving no space for anything else. These should hopefully be enough to accommodate most peoples' accessories.
There are no attempts at fancy or flashy design on the panels either. The sides are bare apart from the branding, Advanced Series Mode surge suppression and power conditioning key features, self-test light-emitting diode and the “A-1-1 Certified” mark in the bottom-left corner of the front panel.
The bottom cover features a product identification and specifications label, along with a “Test ID” that refers to the assembly and test checklist. Along the perimeter, we can see that the enclosure is made from folded sheet metal, with the bottom tray screwed into from the sides.
Plug And Cord
ESP does not try doing anything fancy with its plug, favoring an off-the-shelf 3x2.08mm2 (or 14/3) PVC jacket cable with straight plug-style rated for 15A and 300V. Personally, I prefer flush-type plugs.
It looks like the molded plug got gouged, though I could not find any protruding or sharp edge on the enclosure to explain how. The shipping box also lacks any holes or impact marks. I am inclined to believe it got damaged prior to shipping and slipped through QA.