Very interesting. What if you replaced the horrible PSU with one of the picoPSUs made by minibox (if I'm not mistaken) or miniPSUs that are available. http://www.mini-box.com/picoPSU-120-power-kit?sc=8&category=981 OR http://www.mini-box.com/PW-200M-DC-DC-power-supply?sc=8&category=981 I have one of those running my mini-itx server and works flawlessly, cool, efficiently, and it's 100% silent!
I understand that. Some people would rather have a box that hums and plugs in and just `works.' They won't want nor need to know how or why it works. They won't be able to troubleshoot it hardware-wise themselves, nor know a damn thing about it. They are still required however to plug in their own hard drives and configure the RAID if they wish it. There are markgets for NAS. But it's getting to be silly how many home-target NAS are being pushed out there that cost a ridiculous amount of money for what is essentially a computer that needs HDD's. For that cost, you might as well build your own computer. Or just take any old computer, but gigabit lan in it, fill with HDD's and run FreeNas. All problems solved on the cheap.
Support? Laughable. You'll talk to someone in Duabi or New Dheli or whereever, they'll tell you to unplug it, reset your router, plug it back in, push the power button and wait for it to re-connect. They can't help you with HARD DRIVE problems which is the SOLE purpose of the thing--to serve from HDD's.
I'm all for an attractive easy headless case with built in parts for HDD's. But for $400 and higher for this thing? Please. Any fool reading this website can NewEgg the parts needed, child's play, and have a NICE looking little microatx box housing the SAME capacity and function for less money. The issue with that? Requires a little elbow greace to assemble? Are these the same people who can't change their own tire? ... Probably. There went my whole argument.
very very very IMPORTANT!!!!!
already build an ss4200-ee with 4x1TB hdd, but it went down after 2 weeks.after changing the hardware the data was not recoverd cause the firmware of the ss4200-ee is not similar in another same ss4200-ee
now i have to wait 1 month for the nas to come back from egypt where intel repairs those nas in the middel east
for those who r intrested into building a nas, think of software raid not hardware.
I really don't understand any of these NAS devices. I have an dual core socket 939 motherboard with 3 4-disk RAID 5 arrays (Linux software RAID) and a bunch of single disks, and I can get 40 MB/sec from the single disks over my gigabit network, and faster from the RAIDs. I have the drives in a bunch of Silverstone CFP51 4-drive bays.
Total cost for a cheap case, 4 of the CFP51s, PCI and PCIe controllers, motherboard, CPU and 4 GBs of RAM is probably $7-800, ready to hold 16 hard drives, and considerably faster.
Exactly my point. Since that machine has EVERY piece of hardware SOLDERED to it, you can't just replace ONE part if it breaks. You replace the WHOLE thing. And that's NOt including your HDD's, which they don't help you with, that's just the chasis and the board that has the SOLDERED OS in place, with ZERO input points for changing that.
Support is not possible with a unit like this. Meaningful support, that is. Support that is, "oh sorry to hear that, want to ship it over sears to me? $200 dolla? OOps! It no work, buy new one. BAI!"