Skip to main content

Unified Serial RAID Controllers for PCIe

The main reasons why 3.5" hard drives still dominate the professional world is their physical dimensions, which allowed them to accommodate the wide SCSI connectors. However, the smaller 2.5" form factor is much more attractive, since high spindle speeds can be realized with less strain on the components due to the smaller platter diameter. Dual port hard drives were an imperative for the highest-end applications, but the complex SCSI connectors were a no-go in the 2.5" world. SAS finally changed this: the SFF 8484 connector makes it possible to run either 2.5" or 3.5" drives, and either SAS or SATA protocols. The 2.5" size is more attractive for performance storage arrays, as you can increase the drive density while maintaining throughput levels, yet increasing the number of I/O operations per second. At the same time, a 2.5" hard drive requires considerably less energy than a 3.5" hard drive. This is becoming a major issue for professional users and data centers, where dozens, hundreds or even thousands of hard drives and servers have to not only be powered, but also need to be cooled, which again eats up huge amounts of energy. Cost, clearly, is one of the main driving forces for the 2.5" form factor.

Seagate 10,000 RPM Savvio Drives

The Savvio by Seagate is one of the first success stories in the 2.5" enterprise arena. The Savvio 10K.2 followed after the 10K.1, and the Savvio 15K.1 is one of the highest performing SAS drives on the market. We could not get eight Savvio 15K.1 drives in time, so we decided to go with eight Savvio 10K.2 models; capacity points of 73 GB and 146 GB are available. Our selection was the smaller size to keep benchmark run times within reasonable boundaries. This drive has a 16 MB cache, one 2.5" platter and a 3 Gbit/s SAS interface. As with all enterprise hard drives, it comes with a five-year factory warranty.

What About 3.5" Drives?

They will not die out, but 3.5" SAS drives will slowly disappear from the enterprise performance market in favor of 2.5" form factor units. When it comes to high capacity, 7,200 RPM SATA drives offer the best compromise between performance and capacity, and these have already reached capacity points of 1 TB per hard drive, while 10,000 RPM SAS and SCSI are stuck at 300 GB. To suit the requirements of enterprise storage, all major hard drive vendors offer SATA hard drive products, which are validated for 24/7 operations, and also come with five-year warranties. Seagate’s Barracuda ES, Hitachi UltraStar A7K1000 or E7K500, and Western Digital RAID Edition (RE) models are good examples.