Akasa’s USB4 enclosure delivers speeds over 3.5 GB/s — heatsink and 8,000 RPM fan keep PCIe 5.0 drives cool

Akasa USB4 40Gbps Aluminium Enclosure for NVMe SSDs
(Image credit: Akasa)
2

With the need for fast external storage, enclosures that can house the latest NVMe drives are always available. Akasa has listed an aluminum enclosure that promises to provide USB4 speeds up to 40 Gbps for PCIe 5.0 SSDs, hence supporting USB4 and Thunderbolt 3.

The enclosure includes a heatsink with a couple of thermal pads for NVMe drives between 2242 and 2280 spec and has a built-in fan. To take full advantage of the output bandwidth, the enclosure supports up to PCIe 5.0 SSDs. It has a USB Type-C port and a small Type-C cable, supporting multiple operating systems, including macOS and Android. The casing is made of aluminum and has vents on its sides to allow airflow.

Latest Videos FromTom's Hardware
TOPICS
Roshan Ashraf Shaikh
Contributing Writer

Roshan Ashraf Shaikh has been in the Indian PC hardware community since the early 2000s and has been building PCs, contributing to many Indian tech forums, & blogs. He operated Hardware BBQ for 11 years and wrote news for eTeknix & TweakTown before joining Tom's Hardware team. Besides tech, he is interested in fighting games, movies, anime, and mechanical watches.

  • game-tea
    Wouldn't a good (and very efficient) gen4 drive saturate a 40gbit usb4 bus? Even if the enclosure only has a 2 lane controller, Gen4 x 2 is enough for 4GByte/s, which is more than the enclosure can handle. AFAIK, current new gen 4 drives can be significantly more efficient than gen5 especially with 'half-load' scenario's like this.
    Reply
  • Steve Nord_
    Perhaps when it launches it'll be impressively less useless a scarcely vented chungus, and handsomer. I may not need a LoJack, FIDO2, and cable quality console readout on it, plus a place to warm coffee inset, but it could at least pretend to be a psychommu amplifier.
    Reply