Skip to main content

Pimoroni’s New Raspberry Pi Pico LiPo Board Takes Things Mobile

Raspberry Pi
(Image credit: Phil Howard, Pimoroni)

Phil Howard from the dev team at Pimoroni shared a glimpse of a new Raspberry Pi Pico board, the Pico LiPo, on Twitter. This little board has the same RP2040 found on the Pico but with the addition of a Stemma QT/Qwiic connector.

This addition makes it very easy to create mobile Pico projects. Removing the burden of soldering a power connector into place, the Pico LiPo can accept power from a lithium polymer battery.

In a demo that Howard shared, the Pico LiPo is seen powering a full string of LEDs using a small LiPo battery. While the battery in this example likely won't last long for any practical measures, Howard's tweet provides a clear demonstration of the board's ability.

See more

This support streamlines the build process for things like cosplay projects and decor with easily hidden power solutions. Even Howard had no issues cramming all of the components gently under his desk chair to illuminate the underside of it.

Check out Phil Howard's tweets for more updates and a closer look at the new Pico LiPo controller.

Image 1 of 2

Raspberry Pi

(Image credit: Phil Howard, Pimoroni)
Image 2 of 2

Raspberry Pi

(Image credit: Phil Howard, Pimoroni)
  • Findecanor
    It looks like it is pin-compatible with the original Pico, but with the pin numbers printed on the top of the board thankfully.
    Weird that the mounting holes are omitted though.
    Reply
  • DotNetMaster777
    Pico ! Good job !!
    Reply