You don’t need the Patriot Viper software, at least not really. In addition to the fact that the V760 is a plug-and-play device, Patriot saw fit to enable a significant number of controls through keyboard shortcuts (as detailed above), and because the V760 has onboard storage, you can store your profile settings onto the keyboard itself. For those of you who would rather not pull up an application every time you want to record a macro or adjust a lighting effect, this is a welcome feature.
However, what you can’t do without the software is select the color of your lighting, nor can you assign macros or program keys.
You can download the Viper Keyboard software from the product page. You may want to update the firmware right away, too. With the software installed and open, click the “?” icon in the upper right corner of the window. Click Firmware Update and follow the prompts. In my testing, I had a few issues with the firmware update; in one case, it temporarily borked the keyboard. You can reset the V760 to factory settings with the software, or simply do a hard reset by pressing Fn + Pause/Break.
Lighting, Part Deux
To change the color of the lighting, double-click on any of the seven preset color tiles. The pop-up window displays 48 colors you can choose from. Click any tile, click OK, and then click Apply. The lights on the keyboard will flash several times, and then your chosen color will be set.
If you want to get really granular, open the pop up window again and click Define Custom Colors. From there, you can punch in R, G, and B numbers; enter Hue, Sat, and Lum numbers; or simply drag the cursor all over the rainbow map to pick one. When you have a color you like, click Add To Custom Colors, click OK, and click Apply.
You can also use the software to slide from Low to High brightness or select one of the many aforementioned modes using a drop-down menu. (Depending on which mode you select, you may have additional options available.)
To program a macro, click Macro Management. When the window pops up, click New. Click Start Recording, perform your action, and click Stop Recording to save it. If you need to tweak something you recorded, right-click in the Keystroke Input area, and choose from Record Before, Record After, Insert Delay, Delete, or Insert Mouse Function (left, right, or middle click). You can also opt to check the Delay Between Keystrokes box or loop the action once or multiple times.
Click OK to save. Then, you can assign the macro to a key.
The Viper Keyboard software provides a nice GUI for programming keys. Click any key on the GUI of the keyboard, and you’ll be presented with a pop up window with four tabs: Single/Combine, Macro, Basic, and Advance.
Under Single/Combine, you can click the Single text area and enter - surprise - a single keystroke, or click the Combine text area to enter multiple keystrokes. Click Save to save. Your key is programmed.
Under the Macro tab, all you have to do is click it, select any saved macro, and click Save.
The Basic tab lets you assign a given key to a number of functions including search, run, bringing up Computer, close a window, open the web browser, perform media functions, and more.
The Advanced tab is where you can assign a key to play a specific audio file, open an application, open a file, or open a folder. Just click the empty space in each entry and use the file browser to locate the file.
You can also tick a box to disable any key.
Other options include the ability to toggle Game mode and Windows key lock on or off; adjust the response time (from 2ms to 20ms in increments of two); or set the Report rate to 125Hz, 250Hz, 500Hz, or 1,000Hz.
MORE: Best Deals
MORE: All Keyboard Content