TBS’ Discovery Pro Gimbal Frame
Consider this the platform on which your multi-rotor is built. At its simplest, TBS’ Discovery Pro consists of a top and bottom plate with a number of bundled and integrated subsystems, including its own CORE on-screen display module, a licensed controller for the brushless gimbal, and a camera switcher.
Of course, TBS’ aluminum gimbal frame is a centerpiece of the package, allowing you to strap a GoPro onto the quad and film high-def content. Enabling good-quality footage requires vibration isolation, which TBS addresses through a grommet set. There’s also a bundled GoPro output board to interface with the camera, two direct-drive motors for controlling the GoPro on horizontal and vertical axes and Team BlackSheep’s inertial measurement unit. All of the cables, screws, standoffs and bearings you need to assemble those components are included.
You can start with this basic package for about $600 bucks and add to it using hardware from other vendors. Or, remain on TBS’ site and fill in the blanks through a number of customization options. The Discovery Pro Gimbal Frame leaves you in need of frame arms, to which motors and props must be attached, four speed controllers to drive those motors, a flight control computer, a battery, transmit/receive hardware for flight input and transmit/receive hardware for your first-person view (plus the GoPro, if you plan on filming it all).
Yes, that’s a lot of “leftover” equipment to purchase, and yes, it adds up quickly. But TBS expounds on its baseline offering with a few different packages that at least take guesswork out of the equation. In addition to Team BlackSheep’s entry-level Discovery and Endurance Discovery Pro, you can buy the Discovery Pro as a Starter Set or Long Range Set. Don’t know the difference? Think back to Clym’s introductory story (or pull from your knowledge of Wi-Fi, even)—lower frequencies penetrate obstacles more effectively. So, the Starter Set includes a 5.8GHz video link and 2.4GHz remote control, while the Long Range kit features 2.4GHz video and 433MHz EzUHF remote control. I wanted to spread my wings and really fly, so I picked up the latter configuration.
Beyond the $600 base package, stepping up to the Long Range Set gets you four Flame Wheel F450 arms, DJI’s Naza Lite Flight Control + GPS, four 900kV motors, a quartet of TBS Bulletproof speed controllers, Graupner propellers, FrSky’s Taranis X9D remote control, an EzUHF transmitter module, TBS’ own 4S 3.3A LiPo battery, a charger, TBS’ 59 FPV camera, Fat Shark Dominator video glasses, a Lawmate receiver, TBS' own Unify 2.4GHz video transmitter, a TBS Groundstation LiPo 3S 5Ah battery and a Flame Wheel VTx mount, along with the little bits you’d find yourself missing otherwise like servo extensions, Velcro straps and connectors. Again, that’s a long list of parts, and there’s something to be said for a group of enthusiasts hand-picking them.
Of course, that doesn’t mean everything in the Long Range Set is top-of-the-line. Even after committing to a $2300 kit, TBS gives you a long list of options worth considering. Upgrade the Naza controller (I did), step up to the 69 FPV camera (I did), add another battery to extend your afternoon of flying (I did), upgrade to a bigger battery, trading agility for range (again, I did), have TBS tune components, upgrade to more powerful motors, swap in a longer-range antenna. Over and over, I did these things until my price tag crested $3000. The only option I deliberately avoided: have TBS build and set up the Discovery Pro for me at a cost of $350. That much I wanted to share with you today, regardless of how it turned out.