Leaks confirm $810 Minisforum EliteMini AI370 mini PC with Ryzen AI 9 HX 370
Specs include 32GB LPDDR5X RAM and a 1TB NVMe SSD
The next big wave of Ryzen AI 300-based mini PCs from Beelink, Aoostar, and Minisforum are set to hit the market in the next few weeks. Yesterday, a leaked graphic revealed the design of the Minisforum EliteMini AI370 ahead of its official reveal. We also received an email from Minisforum giving the full specifications of the upcoming EliteMini AI370.
The core specs of the EliteMini AI370's CPU, RAM, and storage are all in line with what we expect from this category. There's also 16GB of LPDDR5X RAM and 1TB of NVMe PCIe 4 SSD storage. The speed of the SSD is not specified, but the RAM is rated for 7500 MT/s. There's an extra NVMe slot, so total SSD capacity will total 4TB with both slots occupied.
The EliteMini AI370 has a Ryzen AI 9 HX 370, which is a 12-core, 24-thread CPU based on AMD's Zen 5 CPU core design, paired with a Radeon 890M iGPU, which has 16 RDNA 3.5-based Compute Units. By comparison, the best last-gen iGPU used in mini PCs and handhelds — the Radeon 780M — only had 12 of these Compute Units. So, not accounting for architectural or CPU improvements, that's roughly a 30% boost in graphics performance.
Besides that, all you really need to know about is the size and the I/O, both of which are partially pictured above. The real size of this Mini PC measures 5.1 x 5 x 1.85 inches (130 x 127 x 46.9 mm) — sure to fit nicely onto any confined desk setup you have. The I/O is nice, too, with one audio port, one USB 4 port, and two USB 3.0 ports up front. The rear I/O is a little more decked-out with two additional USB 3.0 ports, one HDMI port and one DisplayPort, two Ethernet ports, and an additional audio port.
At this point, the only thing that seems to be missing from this lineup of new Mini PCs seems to be OCuLink support. OCuLink would allow for more external GPU performance than a USB 4 or Thunderbolt 4 connection could ever hope for, but it's still a surprisingly rare feature (despite how many PCs are leveraging these iGPU-focused designs).
Stay On the Cutting Edge: Get the Tom's Hardware Newsletter
Get Tom's Hardware's best news and in-depth reviews, straight to your inbox.
Christopher Harper has been a successful freelance tech writer specializing in PC hardware and gaming since 2015, and ghostwrote for various B2B clients in High School before that. Outside of work, Christopher is best known to friends and rivals as an active competitive player in various eSports (particularly fighting games and arena shooters) and a purveyor of music ranging from Jimi Hendrix to Killer Mike to the Sonic Adventure 2 soundtrack.
-
-Fran- Are there any OCuLinks which are for NAS purposes? Like an external raid enclosure via OCuLink?Reply
I can see this little thing being a good NAS driver if you can attach an external enclosure to it. I believe there are a few SIs which do this already, but this having OCuLink may make it easier for the average consumer to make one? Maybe?
Since it's almost pure PCIe, then you can just attach almost anything you can move via PCIe, no?
Regards. -
Pierce2623 I imagine the reason more aren’t going with Oculing over usb4 is the in-practice performance numbers certainly don’t reflect the 60% increase in link bandwidth. In fact it shows very little real gains at all, like maybe 10% if you use an 7800xt/4070 class GPU , down to like ~3%-5% on a 4060.Reply -
Notton Oculink DAS for RAID?Reply
If NVMe, you'd need expensive PCIe switche(s) to split the link into enough lanes for the SSDs to use.
If SATA, USB4's 40GB/s is fast enough, even for SSDs that hit the maximum 6Gb/s.
If you want fully NVMe storage, get an Asustor? It comes in 6-slot, 2x2.5GbE, or 12-slot, 10GbE configuration. (It'd be nice if they got an update with USB4) -
Hartemis Only one USB4 (while the processor has two native ports), two m2 slot, soldered LPDDR5 chips instead of DDR5 slots...Reply
Is it sharing the same motherboard than Beeling SER9?