This $140 Cowboy PC Case Features Real Leather
It might be the ideal PC case to combine with your Jensen-style leather jacket.
Chassis, power, and cooling specialists Geometric Future have launched an appealing real leather-clad PC case in its Model 8 designs. The new Model 8 Cowboy mixes the clean lines formed by brushed aluminum sheets and tempered glass with an appealing cantaloupe flesh-colored cowhide trim and front panel I/O section. At first glance, the design and materials choice appears to be quite premium. Thus the price is a pleasant surprise - HK$1,099 according to tech site HKEPC – roughly $140.
Geometric Future is quite a new company, founded in 2020, and resides in Suzhou, not far from Shanghai. Its website says that the company name represents the underlying design philosophy. It seeks to simplify complexity and aim for user-friendliness with practical but sensory pleasing materials and aesthetics. It gives us some idea about the thinking behind the Model 8 Cowboy.
Having seen the PC case pictures above and below, you will have already started to form an opinion about the design, so let us look at the outer construction specs first to get a good measure of the Cowboy.
The front panel is an uninterrupted sheet of brushed 2mm aluminum. A 4mm smoked tempered glass window to either side with a top trim of 2mm cowhide in cantaloupe orange. You can see the company logo, Geometric Future, subtly embossed into the leather on the left side. On the top of the case, you will see the I/O section towards the front edge, seated within a strap of 2mm leather. Behind the I/O section, a perforated steel panel stretches to the back. Around the rear, there is a large rectangular section with large honeycomb-style perforations, and the bottom of the case appears to be almost open, apart from some criss-cross metal struts.
The Model 8 Cowboy is quite a sizable mid-tower case at 500 x 230 x 500mm (19.7 x 9.1 x 19.7 inches). Thus, it fits up to E-ATX motherboards but will happily accommodate ATX, Micro-ATX, and Mini-ITX boards.
HKEPC offers some further insights into the construction materials and quality. For example, it notes that the structure is 1.0mm SECC steel and that the smell of leather was perceivable.
Summing up the construction, Geometric Future has saved money on deciding not to include filtering over the trio of panels that feature perforations or vents, which is a bit unfortunate.
Stay On the Cutting Edge: Get the Tom's Hardware Newsletter
Get Tom's Hardware's best news and in-depth reviews, straight to your inbox.
Looking inside the case, you quickly notice something quite striking. The inside design has featured a 90-degrees rotation. As a result, the rear I/O, back of the PSU, and the I/O emanating from any seven PCI slots point upwards. Geometric Future reckons this makes the design cleaner. You will thread any necessary cables through one of two moderately large rounded rectangular cutouts at the back. The case maker provides some power extension cables which help with this.
With the rear I/O tucked away by this design, it is good that the Cowboy has a decent set of front/top panel I/O for users. Across this leather trim section, you will find the power button, power HDD activity lights, 2x USB 2.0 Type-A, mic and headphone jacks, 2x USB 3.0 Type-A, and a USB 3.1 Gen.2 Type-C port.
For maximum capacity and compatibility figures, please refer to the specifications. Highlights include the capability for graphics cards up to 400mm long and capacity for sizeable triple-fan air cooling arrays at the rear and bottom – or similarly large liquid cooling radiators.
Specs |
Model 8 Cowboy |
---|---|
Size |
500 × 230 × 500mm, 19.7 ×9.1 × 19.7 inches |
Motherboards |
E-ATX, ATX, Micro-ATX, Mini-ITX With 29mm routing space behind the motherboard |
PSU |
ATX 12V(Length < 220 mm) |
Max drive capacity |
6 × 3.5 inch / 2.5 inch tray mounts |
Front-top I/O |
2x USB 2.0 Type-A, mic and headphone jacks, 2x USB 3.0 Type-A, and a USB 3.1 Gen.2 Type-C port |
Expansion slots |
PCI-E x 7 |
Cooling capacity |
Top : 120mm Fan x 1 120mm Radiator Rear : 120/140mm Fan x 3 420mm Radiator( Length <470mm / Thickness < 55mm ) 360/280mm Radiator ( Length <400mm / Thickness < 65mm ) Bottom : 120/140mm Fan x 3 360/280mm Radiator ( Length < 485mm ) CPU cooler: max 170mm in height |
The PC case retails for HK$1,099, or roughly $140, maybe appealing if we can get a distributor selling this case in the west. Another hurdle for some will be accepting the rear I/O oddness caused by the internal orientation switch.
Buyers should also be aware that leather ages so that the color may change over time depending on the care you give it and environmental factors like sunlight, humidity, and so on.
Mark Tyson is a news editor at Tom's Hardware. He enjoys covering the full breadth of PC tech; from business and semiconductor design to products approaching the edge of reason.
Cooler Master has so many leftover Shark X cases that it's selling them at $4,300 a piece in Japan — the case is admittedly cheaper than the $7,000 pre-built PC that Cooler Master was offering
Smuggler packs 200 pounds of meth into PC cases, gets busted — Australian Border Force foil drug smuggling plot
-
Colif
nice, but how do the front fans get any air?Admin said:Vents and perforations feature on the upper, back, and bottom to help thermal dissipation.
solid front.. sigh. -
MonsterMawd The construction looks very Inwin. They maybe working with them on contract.Reply
The use of real leather may turn off some consumers. (just saying)
@Colif it's positive pressure config, chassis will mount 3 fans in floor and 3 fans in rear, all as intakes, with single exhaust fan on the ceiling. It's actually very smart layout, as all heat is pushed upward and out of the case. It also helps keep the inside of the PC dust free, as six intake fan filters will collect dust more efficiently. -
hotaru.hino
It looks like it's a 90 degree rotated design, if this picture is anything to go by:Colif said:nice, but how do the front fans get any air?
solid front.. sigh.
'
So this is more like Silverstone's FT02/Raven cases. -
Colif okay, i misread situation. I have a FT02 at base of my bed, no need to tell me how good that design works.Reply -
hotaru.hino
I had a build with that case. I sold it off to a friend, but I miss that case.Colif said:okay, i misread situation. I have a FT02 at base of my bed, no need to tell me how good that design works. -
Colif Its my last PC, I don't know what I will end up doing with it. Better cooling case than my current one is.Reply