EVGA X99 Micro Motherboard Review: Haswell-E And MicroATX

Power, Heat, Efficiency And Overclocking

Power, Heat And Efficiency

EVGA’s X99 Micro fits mid-pack in energy consumption, which means that it should also appear mid-pack in efficiency. That quick-and-dirty analysis comes from its average-looking performance in the majority of benchmarks.

The X99 Micro did suffer slightly higher CPU temperatures, but differences this small can be caused by paste placement as much as by voltage differences. Power consumption was consistent with the other products, after all.

I guessed at the top of the page that the EVGA X99 Micro’s mid-pack performance and power consumption would place it dead center in efficiency. The actual results are close, but the X99 Extreme4’s extra-low power consumption bent the curve.

Overclocking

Swipe to scroll horizontally
EVGA X99 Micro BIOS Frequency and Voltage settings (for overclocking)
BIOS Version5.6.5 (09/19/2014)PCH Voltage0.90-1.60V (1mV)
Base Clock80-250MHz (0.05MHz)DRAM Voltage0.80-2.00V (1mV)
CPU Multiplier12-80x (1x)CAS Latency5-31 Cycles
DRAM Data Rates1200-2666 (200/266.6MHz)tRCD5-31 Cycles
CPU Vcore0.80-2.00V (5mV)tRP5-31 Cycles
VCCIN1.50-3.05V (1mV)tRAS10-63 Cycles

Every X99 motherboard we’ve tested is able to push this Core i7-5960X to a 44 x 101MHz core clock, where the additional voltage needed to achieve even higher core frequencies eventually causes thermal throttling. There’s nothing lost or gained in the X99 Micro in this respect.

The X99 Micro ties for last place in BCLK overclocking, though it will allow that same 2% increase to be applied to the 1.25x CPU strap for a 128MHz setting. That will be important when we begin to search for the ultimate in memory bandwidth.

To get that high memory bandwidth, we first need to find a high data rate. EVGA’s X99 Micro helps us by outputting near-perfect DIMM voltage, where both the CPU and DRAM need near-perfection to reach the RAM's rated DDR4-3000.

Memory settings that we don’t often notice, such as slower tertiary memory timings, often allow better overclocks at the cost of bandwidth. EVGA takes the top DRAM data rate, while ASRock and MSI compete for bandwidth superiority.

Thomas Soderstrom
Thomas Soderstrom is a Senior Staff Editor at Tom's Hardware US. He tests and reviews cases, cooling, memory and motherboards.
  • ohim
    the price is insane
    Reply
  • Crashman
    the price is insane
    It's X99, I don't think they could have shaved it by more than 20% even if it were produced by the tens of thousands in China. The question is, what do you think would be "sane"?
    Reply
  • Samer1970
    we need miniITX X99 motherboard ...

    for 6-14 cores compact system.
    Reply
  • ohim
    14433708 said:
    the price is insane
    It's X99, I don't think they could have shaved it by more than 20% even if it were produced by the tens of thousands in China. The question is, what do you think would be "sane"?

    Sorry .. for i don`t know what reason i saw a 485$ price tag initially ...that was an insane price.
    Reply
  • Lutfij
    Thanks for a good read, Thomas!
    Reply
  • Xivilain
    EVGA makes good motherboards. I love my X79 I purchased. But X99 for $485 is truly insane for any motherboard manufacturer. They're riding the Intel inflation wave.

    Also, Amazon is selling this board for $250 USD. (http://www.amazon.com/EVGA-Socket-2666Mhz-Motherboard-131-HE-E995-KR/dp/B00MY3SKEY) Lucky us.
    Reply
  • Lutfij
    http://www.evga.com/Products/Product.aspx?pn=131-HE-E995-KR - $250

    http://www.newegg.com/Product/Product.aspx?Item=N82E16813188161&cm_re=X99_micro-_-13-188-161-_-Product $250

    List pricing is, on most occasions, marked up. As demand come into factor the prices drop gradually. Most often the consumers reaction causes manufacturers to convey a price drop in the hopes of retaining their client base/loyalty.

    Nevertheless, prices are within sanity now :)
    Reply
  • SU11YBEAR
    Got this board last month for a LAN build and am loving it so far (paired with an Evga 980 SC and 5930k, dual 240 rad and CPU/GPU waterblocks) board offers all the features I was looking for except the option for M2 storage which was slightly annoying but bearable, I consider the 4 slots of RAM a bonus, only going to use 4 anyways and frees up space for the smaller factor,
    Only real complaints I have with the board are 1) the IO backplate it came with was a plain silver and just looked cheap (painted it matte black to match the build) and 2) 2 of the fan headers are only settable via the bios and do not change (have used speedfan and bios for the PWM headers) so had to do some quick mods to make the rad fans run off two headers but not a huge deal,
    The IO shield is a cool little option unfortunately since I was doing liquid in a tight case (Corsair 350D) had to remove it to make the tubes reach the top rad, haven't OC it fully yet (just got 4GHz on the chip for now) but looking forward to opening it up :)
    Reply
  • Amdlova
    no way to get an x99 product with this ddr4 insane price.
    Reply
  • InvalidError
    14435806 said:
    no way to get an x99 product with this ddr4 insane price.
    Just about everything about LGA2011(-3) comes with insane prices anyway when compared against mainstream sockets. At least some 4x4GB DDR4 kits have already gone down by about $100 since Haswell-E's introduction.
    Reply