New IDE Hard Drives at 20 GB per Platter: Fujitsu MPG3409 and Western Digital WD400

Features
By
published

Easy Configuration

You won't need an installation guide for either with the Fujitsu or the Western Digital drive. The settings for master or slave mode can easily be adjusted using the on-drive descriptions.

This sticker can be found on top of the MPG3409AT. A similar label is present on the WD drive. Western Digital also printed a jumper description directly on the PCB right behind them:

Thanks to the excellent jumper labeling, everybody should be able to set the jumpers correctly. Right now the drive is configured as single drive.

Patrick Schmid