System Builder Marathon Q3 2014: Mainstream Enthusiast PC

Results: Rendering And Productivity

All of the tests on this page are fully optimized to utilize multi-core (and even multi-processor) configurations.

When comparing two quad-core processoirs based on the same architecture and featuring the same amount of cache, any differences are a result of the clock-rate. The Q3 build continues to enjoy a slight lead because of this advantage, but its nothing to write home about.

  • gamebrigada
    Not sure why you would go with AsRock... I've seen so many failed motherboards from them after a few months of use... Friend of mine is on his 4th swap from them, and is beyond tired of swapping with them, the current one at least has issues that he can work around... with a usb to ethernet adapter....
    Reply
  • mlga91
    Personally, i'd get a cheaper case and put a 970 on there, looks for the cost of performance doesn't seems too wise for me.
    Reply
  • DynamoNED
    14242198 said:
    Personally, i'd get a cheaper case and put a 970 on there, looks for the cost of performance doesn't seems too wise for me.

    While I'd agree on the cheaper case, the 970 wasn't an option since they hadn't been released when they were buying parts for this quarter's SBM.

    From Page 3 of the article: "The GeForce GTX 970 launched last week wasn't available (or even public information) back when we ordered the pieces for this build. So, I needed something cheaper than the Radeon R9 290 that wouldn't sacrifice gaming performance. Under $300, the best option was Nvidia's GeForce GTX 770."

    Obviously, today the 970 would be a much better choice, but that option didn't exist when this build was purchased.
    Reply
  • realibrad
    @ mlga91

    Good job. There is always that guy who does not read the article when it explains why the brand new card was not used, because it was not an option at the time of the review.

    So congrats on being that guy this time. It only took 3 posts to get there.
    Reply
  • de5_Roy
    an ssd and a cm haf case in this build. that should prevent the rages, gasps and disapproving gazes from the last quarter. ;) really though, a o.c. oriented pc should have parts built for speed and this pc has them.

    on the last page:
    When price vs. performance is compared, the new build doesn't look as attractive as the Q3 enthusiast system.
    may be you meant the Q2 enthusiast system. imo, yea, the q3 build doesn't seem as attractive as the q2 one. i think that one could add the ssd from this build and still be the better pc.

    i wonder if you guys would build an fx8350/8320 pc as an alternative build at this price range for the ongoing overclocking theme.
    Reply
  • Onus
    The PSU received a Golden Award at HardwareSecrets, and it did mostly well on other sites as well, although at least three noted the presence of Samxon capacitors. They don't appear to be "GF" series though, which supposedly are the really bad ones.
    I'd like to know more about the thickness / flexibility of the ASRock mobo. Otherwise, I don't think I have any niggles over performance-related parts.
    Reply
  • g-unit1111
    14242123 said:
    Not sure why you would go with AsRock... I've seen so many failed motherboards from them after a few months of use... Friend of mine is on his 4th swap from them, and is beyond tired of swapping with them, the current one at least has issues that he can work around... with a usb to ethernet adapter....

    I've never had any problems with Asrock and I'm on my second Asrock board.
    Reply
  • Onus
    Although some of them are thin and uncomfortably flexible, I've also not had any ASRock mobos die on me, except one likely killed by heat. I have read mixed comments on them, although most reviews tend to be positive.
    Reply
  • Formata
    Yes!!! The hacksaw came out on the RAM! Now your building old skool!
    Reply
  • CaptainTom
    770 stand up to a 290?! You can overclock all you want buddy.
    Reply