Building With The H1
The H1 adds an eight-pin CPU power extension cable and a nifty triple-drive SATA cable to an otherwise ordinary installation kit.
Our SSD screws in place nicely, though 3.5” drive pins might have been a little quicker.
Each card bracket includes a hole to allow its use as a fan mount, when rotated vertically, rather than horizontally.
We didn’t install a fan on the other two tabs, but the default location shown would have been appropriate for cooling a motherboard voltage regulator if the system had been liquid-cooled.
The front panel pops open too, albeit manually, using a push latch.