Trending

EVGA 750 B3 PSU Review

By

Protection Features

Check out our PSUs 101 article to learn more about PSU protection features. Our protection features evaluation methodology is described in detail here.

Protection Features
OCP12V: - 5V: - 3.3V: - 5VSB: 5.1A (170%)
OPP986.158W (120.5%)
OTP-
SCP12V: ✓ 5V: ✓ 3.3V: ✓ 5VSB: ✓ -12V: ✓
PWR_OKOperates properly
NLO✓
SIPSurge: MOV Inrush: NTC thermistor & bypass relay

We weren't able to run all of our protection feature tests because the 750 B3 refused to start after our OPP evaluation. This is exactly what happened with the 850 B3. Although the over-power protection feature's triggering point is fairly normal (close to 120%), it seems to have caused a permanent malfunction, even at modest ambient temperatures.

Given that this is the third B3-series PSU in a row to to die on us under similar conditions, EVGA and Super Flower need to take immediate action.


MORE: Best Power Supplies


MORE: How We Test Power Supplies


MORE: All Power Supply Content

9 Comments Comment from the forums
  • Dark Lord of Tech 07 November 2017 14:03
    Several complaints in the forums from builders , very disappointed with the B3 series.
    Reply
  • logainofhades 07 November 2017 14:30
    Yea, I will no longer recommend a B3 series PSU. Seasonic and Corsair's new CX450m-650m are better options right now.
    Reply
  • SinxarKnights 07 November 2017 15:05
    The solder quality between review samples and retail samples is pretty shady in of itself IMO.
    Reply
  • 10tacle 07 November 2017 17:21
    The fact that EVGA hasn't even responded to the 450W B3 fail test that was back in August is highly disturbing in an of itself. It is inexcusable to just ignore a tech website's inquiry (and serious concerns) as to why a series of their products are failing. I know EVGA's customer support is top notch in the industry (I've had to use it), but their public/customer relations team needs an overhaul. If I were the CEO, I'd be calling for some heads and light a fire under some backsides to ride Super Flower hard for a fix.
    Reply
  • maxwellmelon 08 November 2017 00:11
    with out them identifying the failed component how can they say that the PSU not turning back on after a OPP is not intentional setup because it being shut down at 120% of load is about right like they said. It could be designed that way as a safety feature. and a way to sell more psu because when you try to RMA it they can say you overloaded it and is not covered. Operating above 750 watts is above the psu limits and having a one time OPP shut down is still technically having OPP on it.
    Reply
  • Aris_Mp 08 November 2017 06:23
    When a PSU is broken after OPP's triggering, it is not a feature but a problem. OPP along with the rest of the protections is there to protect the PSU in order not to break when a user goes wild with it.
    Reply
  • Lutfij 08 November 2017 16:27
    The third paragraph of the last page reminded me of what cars with all souped up aftermarket parts but a crappy driver often results with - disaster.

    EVGA Have recently come under flack on other forums as well and their response isn't, erm, admirable. Nice work with the review, Aris, keep it up!
    Reply
  • rtansey378 09 November 2017 07:11
    They must be having issues in the CS department. After dealing with them for an RMA I found their website to be down totally twice and fundamentally broken in important other areas during RMA submission. I was getting different answers from different people to basic questions and there were unreturned emails that led to other issues - it was kind of a nightmare overall that went on for a month. Even after being expedited to a manager of some type it wasn't much better. And their 2-3 advance RMA uses UPS ground so it is not 2-3 days at all. It routinely takes them 3 days to get the replacement into UPS' hands and then UPS takes their sweet time. People also use their expensive desktop PCs for work. I went through that twice as they sent the wrong unit back the first time.

    They charge a premium largely on their CS reputation. I guess they are now hoping people won't have to use it and learn otherwise. Being branded as a good guy in the CS is huge. Being branded as a bad guy is a death sentence. You'd think they would at least return major website emails and spin use some good old corporate spin. They won't even do that. Makes you wonder.

    I hope they figure it out. But Im no longer going to pay their premium. If they have the cheaper product then I would still consider them. That will rarely be the case. They did some nice patented stuff with their GTX 1070/1080 revisions so maybe they are putting all their eggs in that basket.
    Reply
  • mlee 2500 09 November 2017 21:29
    Wow, I expect better from something EVGA puts their name on.

    THANK YOU tom's HARDWARE for performing objective tests on multiple samples to keep us informed and the vendors honest....

    I seriously could have seen myself buying my next PSU based on EVGA's reputation alone. I won't make that that mistake now.
    Reply