Skip to main content

AMD Radeon Pro WX 7100 Review

Inside The Radeon Pro WX 7100

External and Connections

AMD's Radeon Pro WX 7100 is a thin, single-slot card that generally corresponds to the dimensions of the older FirePro W7100 and FirePro W7000. Arguing over colors can be fun, but we'll all get used to AMD's new shade of blue sooner or later.

With an installed length of 9.65” (from the slot bracket to the end of the card), an overall height of 4.13” (from the top of the motherboard slot to the top of card), and a single-slot-compliant depth of only 0.7”, AMD's WX 7100 sports a slender profile.

Looking from the back, the PCB is much shorter than its cooling solution suggests, similar to prior designs. You can see solder vias for a six-pin connector that must have been intended for more compact implementation.

Rotating the card reveals a gill-shaped air outlet, which unfortunately exhausts much of the waste heat back into your case, rather than pushing it out through a vent in the slot bracket.

The bottom of the card has no openings, so the motherboard below stays cool.

The six-pin auxiliary power connector sits at the end of the card. Plan for an extra inch of clearance beyond the back edge to accommodate a power cable. That probably isn't an issue in larger pedestal cases, but it could be an issue in small form-factor enclosures. Standard threads are drilled into the frame for securing the Radeon Pro with a bracket, but no such adapter is included.

There are four DisplayPort 1.4 outputs below a thin array of ventilation slots. They'll accommodate up to four 4K monitors, a single-cable 5K monitor, or two dual-cable 5K monitors.

Cooling System Details

Remove the thin blue aluminum plate and you get an unobstructed view of a rather unique cooling solution. It consists of closed channels of folded aluminum fins with a vapor chamber underneath to move heat away from the GPU as quickly as possible. The VRMs have their own cooler with fins as well.

The fan is one that AMD has used for years. We're already familiar with it from this card's predecessors. Delta manufactures it, it spins at up to 5000 RPM, and we wouldn't call it quiet.

Most of the vapor chamber rests on the GPU. Beyond that, underwhelming contact with the underlying assembly and cooling frame help dissipate waste heat from the chamber somewhat.

This solution isn't optimal because it requires high static pressure to use the cooler efficiently at up to 140 watts. But the measurement results speak for themselves.

The previously mentioned mounting frame cools all eight memory modules and also secures the VRM heat sink, which has its own channel fins. These aren't really efficient though, since some of the airflow escapes from the housing before reaching them, significantly reducing pressure through the channels.

Circuit Board Layout and Power Supply

Uncovering the PCA rewards us with an interesting look at AMD's layout. It’s immediately clear that this implementation has nothing to do with the Radeon RX 480 reference design; rather, it's significantly more complex. That soldered cable extension with the six-pin connector, which is later fastened to the mounting frame and an in-line fuse, is notable.

AMD uses a total of eight 1GB K4G80325FB-HC28 memory modules with a maximum clock rate of 1750 MHz. The use of -HC28 modules instead of faster -HC25 ones could be attributable to thermal issues that higher frequencies might cause.

The GPU’s PWM controller is an International Rectifier IR3567B. It controls the processor's five power phases. Three are connected to the auxiliary six-pin power connector and two trace down to the motherboard slot. It also manages two phases corresponding to the the GDDR5 memory.

Image 1 of 2

Image 2 of 2

All seven phases employ Infineon HEXFETs. While there's an IRF6811 on each high side, the low side has an IRF6894M with a MOSFET that already integrates the necessary Schottky diode. A special feature of both MOSFET packages is their flat metal housing (<28 mils) that allows double-sided cooling.

The other PWM controllers on the board come from Green Solution Technology, where the GS9230 controls the converter for the memory and the GS9238 serves as a stand-alone solution for the remaining components.

Image 1 of 2

Image 2 of 2

It certainly appears that AMD put a lot more effort into the Radeon Pro's design than the Radeon RX 480. This should manifest as higher efficiency under load.