Skip to main content

Compelling Case Mods and Concepts of Computex 2017

Art on the Outside, Power on the Inside

A custom-made desktop PC should be as unique as the person who built it. From commercially-available cases you can use in your own projects to custom mods from chassis artists, these are the coolest-looking PC cases, concepts, and mods we saw at Computex 2017.

All Images Credit: Tom's Hardware

Deepcool Quadstellar

The Quadstellar follows Deepcool’s Tristellar case from 2015. Where the Tristellar had three distinct compartments joined at the center of the case, the Quadstellar’s four compartments flow into each other much more. The device now has room for an ATX motherboard and four dual-slot graphics cards.
 
The motherboard spans from the core of the chassis into one of the compartments, with the graphics cards all located towards the center of the chassis. The additional three cabins consequently offer room for a 280-mm long ATX PSU and up to nine 3.5-inch hard drives, or twelve 2.5-inch units and the cooling hardware.

There’s room for up to a 360mm radiator up front and a 240mm unit at the bottom. The front air intake also has a neat trick up its sleeve: When the internal case temperature rises, it will open up to allow for more air flow.

In-Win Winbot

Winbot. It’s a case, and it’s a robot, sort of. It has a plexiglass dome, with aluminum structures that can support an E-ATX motherboard and 340mm-long graphics cards, and it has eight PCIe slots and four HDD modules--but it’s much more than that.
 
It has a dual camera module that lets you make gestures (to, say, move the case on its axis, electronically), or to allow for facial recognition (for authentication, mainly). If you’ve got an Amazon Alexa, it will assist with voice recognition, as well. You can command Winbot to take photos using its camera. It’s unclear if In-Win will take this case to market, and if so, when, and at what price.

Donkey Kong Case

This mod’s design harkens back to Nintendo's 8-bit classic from 1981. Built by Thermaltake's U.S. team and based on a Tower 900 chassis, the Donkey Kong PC has original Nintendo glass and stickers, an eighties-tastic blue paint job, and a cooling pipe layout that looks just like the ladders and planks in the game. It also plays the Donkey Kong theme song.

Corsair Concept Slate

Want one PC for streaming and another for gaming? This giant tower case has room for two different, discrete computers inside, each with its own power button, liquid cooling system, and collection of storage drives.
 
The entire Concept Slate case is made from glass and aluminum with room for over 30 different case fans and three different radiators. As built, the prototype on display at Corsair's Computex suite weighed around 150 pounds. There’s no word on when or whether this is coming to market.

TTower 1O1 (Taipei 101 Case)

Belgian Mike Petereyns' custom case brings new meaning to the term "full tower." Like many of the mods showcased in Thermaltake's Computex booth, it’s based on the Tower 900 case. This one is made to look like world-famous skyscraper Taipei 101. Green-tinted windows and green coolant match the color scheme of Taiwan's most famous building.
 
A spire on top of the case completes the look. Unfortunately, unlike the real building, there's no Din Tai Fung restaurant in the base.

WarCar

Inspired by Crossout, a popular post-apocalyptic MMO, the WarCar looks like a jeep that's ready for a fight, complete with dual machine gun turrets and a skull on the front. Unlike most mods you see, this car was built from scratch and not based on an existing commercial chassis.
 
Designed by a modder named FUXK, this chassis is about the size of a child's electric car so it would take a fair amount of work to transport it to your next LAN party. It also makes a point of hiding its motherboard. When we saw WarCar in person at Colorful's Computex 2017 booth, we had to look under the canopy just to see that there were components inside.

Steampunk Case

Modder Ronnie Hara of Japan took a Thermaltake Tower 900 and turned it into a metallic steampunk masterpiece. The case has elements of copper, silver, and leather to give it that high-tech 19th century look.
 
We particularly like the giant purple cooling reservoirs inside that make the components look more like a mad scientist's lair than a PC. A bas relief Aorus logo adorns the left side to let you know that some of the components inside are from Aorus / Gigabyte.
 

H.R. Giger-Inspired Case

Artist H.R. Giger's creepy monster designs inspired the look of the Xenomorph from the Alien Movies and also this case. Designer Ron Lee Christianson used a Thermaltake Tower 900 chassis and added the haunting head, bones, and body parts with custom-sculpted foam and epoxy clay. Christianson was inspired specifically by Giger's 1977 book “Necronomicon.”

In-Win "The Floating"

Letting it all hang out, the Floating is an open case with RGB-lit structures to which you can attach your PC parts. The case is made of reflective tempered glass. On the upper left side, there’s an LED readout of sensor metrics (temperature, fan speed--you know the drill). Other structural parts are made of aluminum, and being an open case, it can support pretty much any number and size components you can throw at it.
 
At Computex 2017, The Floating showcased an Asus Crosshair VI motherboard with individually addressable RGB lights, coupled with In-Win’s Aurora fans that have their own individually addressable RGB lights, and all of the components sitting on structures outlined in, you guessed it, addressable RGB lights.

Pirates of the Caribbean Case

If watching five different movies with Johnny Depp's Jack Sparrow character isn't enough for you, you can always make your PC look like this one. Based on a Thermaltake Tower 900, Modder Corey Gregory's case comes complete with a sunken ship inside, a skull on top, and seaweed accents sprouting from the top. We particularly like the rusty aesthetic that makes the panels look like the sides of a pirate ship.

  • Jack_Burton
    The Giger inspired case doesn't have enough penis shapes.
    Reply
  • delta5
    I'd be interested in the, Cryorig Taku Case, or the, Calyos NSG-SO PC case.
    Reply
  • RomeoReject
    There was some cool stuff here! Loved the Quad, the MadMax-style one, and the Calyos.
    Reply
  • Duff72
    So the quadstellar case is cool but they showed that last year. STILL waiting for it's release date.
    Reply
  • FritzEiv
    19837373 said:
    So the quadstellar case is cool but they showed that last year. STILL waiting for it's release date.

    Did they? I wasn't at Computex last year, but I think you're thinking of CES 2017 (January), right? As big as the Quadstellar is and how much space it would take up, I have to admit I wouldn't mind seeing that somewhere -- in my home office or at my office office. I mean, if you're going to go all in, might as well do it right.
    Reply
  • Duff72
    19837441 said:
    19837373 said:
    So the quadstellar case is cool but they showed that last year. STILL waiting for it's release date.

    Did they? I wasn't at Computex last year, but I think you're thinking of CES 2017 (January), right? As big as the Quadstellar is and how much space it would take up, I have to admit I wouldn't mind seeing that somewhere -- in my home office or at my office office. I mean, if you're going to go all in, might as well do it right.

    Womp womp. You are correct. Feels like it was last year. HURRY UP AND TAKE MAH MONEY! lol
    Reply
  • WildCard999
    I really like that Corsair Concept Slate, would work great for a dual battlestations setup.
    Reply