The Southbridge Battle: nforce 6 MCP vs. ICH7 vs. ICH8

by

RAID Creation

The mediashield Setup Wizard starts by showing you the available hard drives.

In the next step you define the RAID mode and stripe size.

Then you add hard drives to your RAID setup...

... and you can even add one disk that already includes data, e.g. The system hard drive. The mediashield Wizard will keep the data and transform the single volume into your desired RAID array.
Previous Next
Summary
  1. Intel Or Nvidia, Part 2: Interface And Storage Performance Compared
  2. Intel 82801GR (ICH7-R, 975X)
  3. RAID Level Creation
  4. Intel 82801HR (ICH8, P965)
  5. RAID Level Creation
  6. What Intel Matrix RAID Does
  7. Nvidia Media Communications Processor (MCP, nForce 6 Series)
  8. RAID Creation
  9. Notification, Handling And Rebuild Of A Degraded RAID 5
  10. Test Setup
  11. Benchmark Results
  12. RAID 1+0 Transfer-Diagrams
  13. RAID 5 Transfer-Diagrams
  14. RAID 0 I/O Performance
  15. RAID 0+1 I/O Performance
  16. RAID 5 I/O Performance
  17. Average Storage Performance
  18. Conclusion
About the author
Patrick Schmid
Read more
This thread is closed for comments
No comments yet
Comment from the forums
    Your comment
Most Popular
  1. PCI Express SATA RAID Controllers For SMB Servers
  2. PC Hard Drives That Pack More Power for Less Dough
  3. 2.5" Hard Drives by Toshiba and Western Digital Rev Up
The Latest On Tom's Hardware
Edition
Subscribe to our newsletter
Company
Resources
Other Purch sites
  • © 2019 Purch All Rights Reserved.