SAS Hard Drives: 15,000 vs. 10,000 RPM

Features
By
Published

Test Setup

Swipe to scroll horizontally
System Hardware
Processor(s) 2x Intel Xeon Processor (Nocona core)3.6 GHz, FSB800, 1 MB L2 Cache
Platform Asus NCL-DS (Socket 604)Intel E7520 Chipset, BIOS 1005
RAM Corsair CM72DD512AR-400 (DDR2-400 ECC, reg.)2x 512 MB, CL3-3-3-10 Timings
System Hard Drive Western Digital Caviar WD1200JB120 GB, 7,200 U/Min, 8 MB Cache, UltraATA/100
Mass Storage Controller(s) Intel 82801EB UltraATA/100 Controller (ICH5)
Networking Broadcom BCM5721 On-Board Gigabit Ethernet NIC
Graphics Subsystem On-Board GraphicsATI RageXL, 8 MB
System Hardware
Performance Measurements Atto Diskmark
I/O Performance IOMeter 2003.05.10Fileserver-BenchmarkWebserver-BenchmarkDatabase-BenchmarkWorkstation-Benchmark
System Software & Drivers
OS Microsoft Windows Server 2003 Enterprise Edition,
Service Pack 1
Platform Driver Intel Chipset Installation Utility 7.0.0.1025
Graphics Driver Default Windows Graphics Driver

We Used Four Hard Drives

Patrick Schmid
Patrick Schmid
Editor-in-Chief (2005-2006)

Patrick Schmid was the editor-in-chief for Tom's Hardware from 2005 to 2006. He wrote numerous articles on a wide range of hardware topics, including storage, CPUs, and system builds.

1 Comment Comment from the forums
  • DeanRS
    The Raid 0 benchmarks include Raid 5 File server that is also shown again in the Raid 5 Benchmarks section. Raid 5 shows webserver data and Raid 0 does not. I think that the Raid 0 webserver data is not shown as Raid 5 fileserver data is in its place.
    Reply