Brightness & Contrast
To read about our monitor tests in depth, please check out Display Testing Explained: How We Test Monitors and TVs. Brightness and Contrast testing is covered on page two.
Uncalibrated – Maximum Backlight Level
More and more professional screens now come with Ultra HD resolution; QHD and FHD screens are beginning to fade in this category. In our group today we have the two 5K panels from Dell (UP2715K) and HP (Z27q). We also have BenQ’s SW2700PT and two PA-series NECs, the PA322UHD and PA302W 16:10 monitor. The main point of comparison here is that all products are IPS-based and include both sRGB and Adobe RGB gamut options.
The PA329Q easily meets its 350cd/m2 output claim. There is more than enough brightness available for any potential application. The above result is from Standard mode. Adobe RGB and sRGB max out at 170cd/m2, while Darkroom (the only fully-adjustable preset) achieves around 220cd/m2 peak.
Minimum black is a little higher than the other screens. While the difference is small, a deeper level would be welcome. Contrast isn’t a strong suit of any UHD monitor we’ve tested. Perhaps in the near future we’ll see OLED panels in this category. Hopefully, we’ll be able to test Dell’s new UP3017Q soon! Not surprisingly the high black level puts the PA329Q at the bottom of the max contrast ranking. While this isn’t a bad number, it doesn’t quite reach our preferred 1000:1 level.
Uncalibrated – Minimum Backlight Level
Dropping the PA329Q’s brightness slider to zero results in an ideal 50.5452cd/m2. This is the perfect level for working in total darkness. You can still see the screen’s full contrast without much eye fatigue, even after long editing sessions; just the thing for video post-production.
The minimum black level is still a bit higher than the others except the HP, which is now in last place. Shadow detail is fine but the overall look is a bit more gray rather than true black.
Contrast is almost identical to the max number which is ultimately the most important takeaway from this test. Consistency is important and ensures the image looks exactly the same regardless of output level or environmental conditions.
MORE: Best Gaming Monitors
MORE: Best Professional Monitors
MORE: How We Test Monitors
MORE: How To Choose A Monitor
MORE: All Monitor Content
After Calibration to 200cd/m2
The Standard mode is the only preset that offers uniformity compensation. In a departure from monitors we’ve tested previously, the PA329Q actually ups its output slightly. We’ll have to see how that affects the final contrast result. Black levels are more greatly impacted. Here we see a 60% increase in its value. Unfortunately that means contrast will be visibly lower.
Contrast is reduced by 38% when uniformity compensation is engaged. Given the results we recorded in the field tests on page seven, our conclusion is that the feature doesn’t improve performance, at least where our particular sample is concerned. Most users won’t be able to use it anyway given that it’s locked out in the Adobe and sRGB presets.
ANSI Contrast Ratio
ANSI contrast is a bit less-affected by UniComp; only a 29% drop. The better news is that intra-image contrast is almost identical to sequential. The PA329Q is a very well engineered and built panel with a precise grid polarizer and good quality control.