Trending

Enthusiast P55: Eight LGA 1156 Boards Between $150 And $200

By

Benchmark Results: Crysis And Far Cry 2

Crysis may no longer be a cutting-edge game, but its cutting-edge hardware requirements make a great benchmark.

When sorted by average performance, the system order between our lower and higher Crysis settings are nearly reversed. Still, the difference between motherboards is academic at this point.

Far Cry 2 shows similar inconsistency in order of performance while continuing to show similar overall performance between all motherboard models.

60 Comments Comment from the forums
  • enzo matrix 11 November 2009 13:07
    interesting
    Reply
  • skora 11 November 2009 13:25
    There's two market segments. Once you get the features you need, there's overclockers, and stock users. I've never seen a mobo recommended based on its application performance and all thats looked at is how well it OCs. Hopefully, people read the article and don't just go buying biostar expecting the regular quality of gigabyte or asus though the asus is a little overpriced here for my taste. That $25 can go towards a better GPU, but I'm a gamer.
    Reply
  • Crashman 11 November 2009 13:50
    enzo matrixinteresting
    Gigabyte had some additional interesting news about the new P55A-UD4P, where the addition of the letter "A" supposedly means "Advanced" and refers to the addition of SATA 6.0 Gb/s and USB 3.0 controllers. Unfortunately, it wasn't ready when the comparison was written. The "A" also cost slightly more.
    Reply
  • ibnsina 11 November 2009 17:04
    For $15 more is best to go for the newly released Giga-byte GA-P55A-UD4P, the extra’s you get are:-

    2 x USB 3.0
    2 x SATA 6Gb/s.

    $184.99 on newegg.
    Reply
  • Crashman 11 November 2009 17:43
    ibnsinaFor $15 more is best to go for the newly released Giga-byte GA-P55A-UD4P, the extra’s you get are:-2 x USB 3.0 2 x SATA 6Gb/s.$184.99 on newegg.
    $15 for all that sounds great, unless those features are useless to you. SATA 6.0 Gb/s will remain completely useless until long after the board is outdated, and USB 3.0 is nothing more than an eSATA substitute at the moment.
    Reply
  • apache_lives 11 November 2009 18:40
    Why do we bitch about IDE and FDD connectors? If your using windows xp and IDE hdd/dvd drives your should be ashamed, and even then you can get USB floppys etc, and if you are using those fittings you are not getting the true performance out of your modern system, and IDE also makes boot times longer thanks to detection and legacy delays - cudos to those who ditch those ports in an effort to modernise modern systems, and to those who keep them - its like adding ISA ports to the board - times up.
    Reply
  • cahl 11 November 2009 18:55
    The new P55A-UD4P has better power phasing, 12+2 vs 8+2 on the old gigabyte UD4P, and probably more stuff aswell, like the LOTES socket, well worth the extra $15 to me.
    Reply
  • bigballinggpr 11 November 2009 19:14
    You don't bring up MSI's board at all in the conclusion. . . i'm a little curious as to what your final thoughts are on it.
    Reply
  • Crashman 11 November 2009 20:26
    apache_livesWhy do we bitch about IDE and FDD connectors? If your using windows xp and IDE hdd/dvd drives your should be ashamed, and even then you can get USB floppys etc, and if you are using those fittings you are not getting the true performance out of your modern system, and IDE also makes boot times longer thanks to detection and legacy delays - cudos to those who ditch those ports in an effort to modernise modern systems, and to those who keep them - its like adding ISA ports to the board - times up.
    You mean complain? Like you're complaining right now? It's all a matter of logic: There are probably more Windows XP users carrying over their old OS into a new build than there are Ultra ATA users carrying over their ancient hard drives. Therefor, the floppy interface, as outdated as it is, is more useful than the Ultra ATA interface.

    The problem as described is that you PAY for an Ultra ATA controller. Why bother? Even if you're an XP devotee you probably don't WANT to pay for an Ultra ATA connector.

    But for most motherboards, the floppy interface is free. It doesn't slow down boot times or performance either, if you don't need it you can ignore it.

    Well, maybe you can't ignore it, but a logic dictates over emotion in reviews.

    THG has no reason to love or hate the floppy connector, no stake in the legacy OS game, but anyone reader who wants to play the hater deserves to be called out for it. As for the manufacturers, honest reporting is Tom's Hardware's goal. Personally, I like the fact that some manufacturers provide legacy features and others don't, both types of products work well.
    Reply
  • doomtomb 11 November 2009 21:36
    with only a single PS/2 port left behind to support the older mice occasionally preferred by seasoned gamers

    This is from the page on the EVGA P55 but you can clearly see it is a purple PS/2 port which is for keyboards... lol
    Reply