Silent, But Deadly: Build Your Own Gaming-Ready 0 dB PC

How-to
By Igor Wallossek
published

For many folks, the most beautiful sound that a PC can make is no sound at all. How close can Tom's Hardware get to a zero-decibel configuration and still lend up with a compact, functional machine capable of mainstream gaming, without breaking the bank?

Small, Inexpensive, Silent Gaming Is Here

Modern energy-efficient graphics cards make it possible to game on affordable, passively-cooled platforms (and they don't have to be massive, either). Even without the "just-in-case" fan we've been talking about, you shouldn't encounter any thermal issues.

As with any build, you'll want to balance host and graphics processing performance so that you don't create bottlenecks. If you're using integrated graphics, AMD’s A10-5700 is a good choice. If you have a passively-cooled add-in board, an inexpensive Ivy Bridge-based Pentium or Core i3 is the better option. They run cooler, and at $100 for a Pentium G2120, they aren’t really any more expensive.

The much-touted Dual Graphics feature that lets you match an APU up to a discrete card in CrossFire is pointless. Current-gen passively-cooled graphics cards offer better performance and efficiency, and they don't saddle you with the problems of multi-GPU setups.

It’s too bad that we weren't able to find any passively-cooled GeForce GTX 650s. Do-it-yourself is the only way to go if that's the direction you head. You'll want to decide for yourself if a third-party heat sink is worth the extra cost.

Igor Wallossek
See more PC Building How To
136 Comments Comment from the forums
  • ASHISH65
    great article !!!
    Reply
  • azathoth
    I was disappointed there wasn't actual stress test temperature results of the APU for the passive cooling solution.

    But otherwise it's a neat article, personally I would sacrifice dead silence to use a cheaper HDD and perhaps more of those silent fans if I were to build one myself.
    Reply
  • mayankleoboy1
    Great article! Much more DIY than the usual articles on Toms.
    Much appreciated.
    Reply
  • _Pez_
    Great PC !, but if it was mine I would be scared... "no fan noise .. is it burning?"
    Reply
  • Nintendo Maniac 64
    As someone that also uses a semi-passive PC (fan only turns on when needed), I'm disappointed that you guys left out a few big things:

    1. undervolting the CPU and GPU

    2. underclocking and farther undervolting the GPU for 2D mode

    3. hybrid cooling setup for GPUs where the fan only turns on at a high temperature (may require GPU BIOS editing depending on GPU model)

    OPTIONAL (due to risk): removal of CPU IHS
    Reply
  • dudewitbow
    no love for sapphire's passive ultimate HD 7770?
    Reply
  • Madn3ss795
    Pentium G2120 + Sapphire Ultimate HD7750 would have been a better choice. And you can pay extra for a low-power Core i5 instead since it's not that expensive compared to the rest of this build.
    Reply
  • ivyanev
    When i hear gaming from the TH I really expect to see something in the realm of 500$ SBM machine or at least something close. What I see here is realy nice office pc.
    Reply
  • Nintendo Maniac 64
    10589934 said:
    When i hear gaming from the TH I really expect to see something in the realm of 500$ SBM machine or at least something close. What I see here is realy nice office pc.
    The main issue is the GPU, and that would require a hybrid passive-active cooling solution much like was done for the CPU, but for some reason they didn't even try such a thing...
    Reply
  • twelve25
    I wonder about an i5 or i7 S or T model and crossfire 7750's. You might need a bigger case and a longer motherboard that allows gaps between cards.

    Reply