There's never been a better time to join the world of 3D printing or, for experienced makers, to upgrade. With the right printer, you can make models, toys, hooks, stands, replacement parts for electronics or a new case for your Raspberry Pi. You can get one of the best 3D printers and plenty of material for well under $300 in 2022, so consider what you’ll be making with it and read on to learn more.
The two most common types of home 3D printers are resin MSLA (Masked Stereolithography) and filament FDM (Fused Deposition Modeling). The best 3D printers for beginners or those with children, FDM printers use reels full of plastic filament that is fed into a hot nozzle and extruded out layer-by-layer to form a solid model. MSLA printers use a UV-cured resin material to form a model layer-by-layer as it rises from a vat of liquid that requires very careful handling.
There are several factors to consider before buying the best 3D printer for you, so be sure to consider the questions before making a choice.
Shopping Tips for Best 3D Printers
- Resin MSLA or Filament FDM? The two most popular styles of desktop 3D printing, resin MSLA and filament FDM 3D printers offer various strengths and weaknesses, and choosing the style more suited for your application will help you get better results. For many , especially beginners, filament 3D printers are a better choice because they are easier to use and offer a wide variety of colors. They are also far safer for anyone with children or pets around.
Resin 3D printers can provide a bit more detail, so they are popular among folks printing out game pieces. However, you need to handle toxic chemicals and wear a mask when setting up a print and, after the printing is over, you must wash and cure your prints. We have some resin printers on this list but also maintain a more detailed article where we name all of the best resin 3D printers.
- How much build volume do you need? If you want to print out large parts in a single print, you’ll need a printer with ample build volume. This is usually directly tied to the price of the machine, so a larger printer is going to cost more money. Printers with a 100mm cubed or less build volume are on the smaller side, 150 to 220mm cubed are average, and 250mm inch cubed and above are considered large format.
- Manual or automatic bed leveling? Leveling the bed of a 3D printer is an important part of the printing process, and it can be time-consuming and difficult if you’ve never done it before. Some printers have the ability to automatically level the bed which can get you up and printing faster.
- What’s your experience level? If you’re an absolute beginner to 3D printing, you’ll want to find a first printer that offers a good out-of-the-box experience without too much tinkering. If you’ve already logged some print time, than you might be more interested in printers with advanced or unique features or ones that are open-source and easily modified.
Best 3D Printers You Can Buy Today
If you ask someone involved with 3D printing what their first machine was, there’s a good chance they’ll tell you it was the Creality Ender 3 Pro. A wildly popular 3D printer, the Ender 3 Pro packs a powerful punch in the form of a low-cost machine that has an almost endless supply of readily available upgrades to adapt it to your specific needs. Whether you want a 3D printer to convert into a laser engraver, a pen plotter, or just a printer to print specialized high-temperature materials, the Ender 3 Pro can accommodate you with no issues.
The Ender 3 Pro arrives as a kit in need of assembly, so you’ll want to put aside at least a few hours to build, calibrate, and possibly troubleshoot your new machine before using it. The Ender 3 Pro has a 350W power supply, so the bed and heated nozzle heat up quickly and keep a consistent temperature when printing.
Creality has released all of the mechanical and electrical schematics for this machine under an Open Source licence, so it’s easy to find upgrades and modifications that have been built using these blueprints. If you love to tinker and can’t wait to turn your 3D printer into a custom build, it’s hard to go wrong with the Creality Ender 3 Pro.
If you’re getting into resin 3D printing for the first time, you have an overwhelming number of options and price points. The good news for beginners is you don’t have to sacrifice your budget for quality. You can find the easy-to-use Mars 2 Pro on sale for as little as $200.
Its smaller build volume is perfect for gaming miniatures and trinkets but not larger models. And though its 2k resolution may not be the most detailed among resin printers, it is miles ahead of the quality you can achieve with a filament-based machine.
The Mars 2 Pro comes with a built-in filter system that I found really helps with fumes associated with resin printing. Its spring-loaded self-leveling build platforms is hands down the easiest system we’ve ever used.
Shopping for a 3D printer on a budget no longer means resorting to a bare bones DIY kit. The Neptune 3 offers a lot of features – and quality prints – in a tidy package that’s easy on your wallet. You’ll get auto bed leveling, an easy to remove flexible build surface and a color touch screen all for a pre-order price of $209.99 and a regular price of $220.
The Neptune 3 arrives as a mostly assembled modular system that we were able to put together in about 20 minutes. The printer has a hard-mounted hot bed without any adjustment knobs – we found the auto bed leveling system extremely easy to use and very accurate. The bed wasn’t as sticky as we would have liked, but after a light scuffing with steel wool it worked as it should.
We also like the dual gear Bowden extruder, which handled soft TPU filament as smoothly as PLA in our tests. The advanced filament sensor impressed us with its ability to detect jams by looking for motion along the filament path. This means the machine can alert you to jams when the filament stops moving as well as sense when it’s run out of material.
If you’re looking for a 3D printer that delivers excellent quality while also being easy to operate, the Anycubic Kobra is for you. a fun hobby.
It’s so easy to assemble, you’ll be printing within 30 minutes of unboxing. It has an easy to load direct drive and an auto bed leveling system that takes the headache out of achieving a perfect first layer. The print surface is a magnetic plate with a PEI coating that grips while hot and magically releases when cool.
Be sure to add a roll of filament to your cart when buying the Anycubic Kobra because you’ll be printing up a storm on its generous 220 X 220 X 250 print volume.
More: Anycubic Kobra Review
Considered the best 3D printer overall by many aficionados, the Prusa MK3S+ has received countless industry accolades and awards, and with good reason. The MK3S+ is a powerhouse 3D printer that combines reliable hardware, feature-rich software, and a support channel that makes the Prusa signature black and orange hardware a common sight in 3D printing farms. The MK3S+ is based on the i3 platform and has benefitted from several generations of incremental upgrades which have resulted in one of the best 3D printers on the market.
Silent stepper drivers, removable textured build platforms, automatic bed leveling probe and more; the list of features that come stock on the Prusa MK3S+ is certainly impressive, but that’s only part of the story with the MK3S+. Prusa has developed their own slicer app, PrusaSlicer, for processing 3D models and is actively adding new features requested by the community. Features like the ability to paint-on support material, create variable layer heights and generate custom printer profiles are examples of how PrusaSlicer enables the MK3S+ to leap ahead of the competition.
At a price point of $999 for an assembled printer and $749 for a DIY kit, the MK3S+ is one of the most expensive machines on this list. That price may raise some eyebrows among 3D printing enthusiasts who have become accustomed to printers in the sub-$300 price range, but for power users who need uncompromising performance and industry-leading documentation and support, the MK3S+ is at the top of the list.
If you’re looking for the most precise prints around, the Phrozen Sonic Mini 8K is your best choice. This MSLA resin 3D printer sports a 7.1-inch mono LCD screen that operates at 7500 x 3240, which results in a show-stopping 0.22mm XY resolution, the highest on the market. It comes fully assembled and is easy to use, just calibrate and go.
It also boasts native integration with both the ChituBox and Lychee Slicer apps. Combine the Sonic Mini 8K with Phrozen’s Aqua Gray 8K resin and you’ll see smoother prints with more crispy details than ever before.
The Phrozen Sonic Mini 8K has a sturdy metal build, dual rails and an all-metal vat with feet that prevent the FEP sheet from touching your work surface. The build plate is laser etched for amazing adhesion.
Selling for a retail price of $599.99 the Phrozen Sonic Mini 8K is targeted towards miniature makers and jewelry designers who are ready to level up their prints. For beginners looking for a high-resolution machine at a lower cost, the Phrozen Sonic Mini 4K offers .035mm XY with the same speed and precision for $349.00.
If you’re looking for your first 3D printer and don’t want to spend a lot of money, the Ender 2 Pro is a great choice. The machine retails for $169, but can often be found on sale for much less (we bought it for just $129 at Micro Center). Many printers at this price point are novelties built of cheap plastic, but the Ender 2 Pro is a solid workhorse (or perhaps pony) that shares many parts with its big brothers of the Ender 3 line.
In our tests, the Ender 2 Pro delivered great print quality when used with decement filament and a slicer. Our prints of 3D Benchy (a model of a boat people often for testing) and a crystal dragon looked fabulous.
Need to move the printer around the house? The Ender 2 Pro is a compact machine that weighs under 10 pounds. Its top mounted handle makes it portable enough to be stashed in a closet when not in use – perfect for the weekend hobbyist. The main trade-off is that the 165 x 165 x 180mm build volume is tiny compared to most printers.
Putting together the Ender 2 Pro was a breeze for us. It comes 90% assembled – screw in a few bolts and the machine is ready for use. It has silent stepper drivers and quiet cooling fans, making it a pleasant office companion. The flexible textured bed holds models tight while printing and peels right off when finished.
The Ender 2 Pro can be easily upgraded with 3rd party hotends and more durable bed surfaces, making this a machine that can grow with you.
When you want a little more elbow room than the average 3D printer, the Anycubic Kobra Plus has your back. With a generous 300 x 300 x 350mm build volume and a near perfect auto bed leveling system, the Kobra Plus is the perfect tool for big projects.
Competitively priced at $499, the Kobra Plus has a lightweight Bowden extruder paired with a Volcano-style hotend for faster printing. Big glass beds can be a problem on some printers, but Anycubic’s formula for carborundum coating is just right. When it was heated up, we found the Kobra Plus bed to be tacky to the touch, which really grabbed onto the prints. If you allow the bed to cool thoroughly, prints release easily and only need a tiny bit of persuasion from a scraper.
The Kobra Plus is a great all around machine. We were able to print string-free TPU models and it handled PETG as easily as PLA. Our only problem with this printer was having to manually create a profile in Cura as it was not included. However, if you only have room for one printer in your workshop, this is the one.
If you want to print with PLA filament, any competent FDM printer can get the job done. ABS and PETG materials are a bit more demanding, but still usable on a high-quality machine. But if you want to use more exotic materials such as nylon or carbon fiber, you’ll need a printer that can get much hotter than the 240-degree cap we see on popular models like the Creality Ender 3 Pro.
Able to reach up to 300 degree temperatures thanks to its aluminum nozzle, the Voxelab Aquila S2 can produce gorgeous prints with filaments that other models can’t handle. In our tests, it produced a highly-detailed print of “benchy,” a boat commonly used as a test model, in nylon. It also provided strong output when we tried a detailed bust of Groot with PLA.
Aquila S2’s magnetic build plate is flexible, with both a textured side and a smooth side. The open-air printer is fairly easy to set up and uses a 4.3-inch display with a dial as its interface. It comes with two different slicer apps: Ultimaker Cura and VoxelMaker, though the former is the industry standard and the one you’ll most likely want to use. The biggest downside to Voxelab’s printer is that it requires manual bed leveling so you’ll need to do that work if you want to ensure you get a good first layer.
More: Voxelab Aquila S2 Review
The Anycubic Vyper is designed for high-throughput 3D printing, and impressed us with its rock-solid build construction and impressive list of features. Silent stepper drivers, dual Z threaded rods and a high-airflow part cooling system are just a few of the many features that make the Vyper an easy choice for anyone interested in printing out large quantities of parts.
The strain-gauge bed leveling system allows the Vyper to quickly and accurately complete an automatic mesh bed calibration. This form of calibration is ideal for anyone who doesn’t want to spend a lot of time tweaking or calibrating the printer, and it worked well during testing and didn’t require any further adjustments to get an even first layer.
The Vyper isn’t the cheapest printer on this list, but it earned its place by providing a fast setup and trouble-free operation throughout our testing. The Vyper was designed with an impressive level of attention to detail, and the various areas on a 3D printer that would require adjustment (extruder, X/Y belts, etc.) are all easily accessible and adjustable. The included Cura slicer app is easy to use, but the printer profile that ships with the machine might require some tweaking that beginning users may struggle with.
More: Anycubic Vyper Review
If you’re interested in printing models with lots of fine detail, the Phrozen Sonic Mini 4K should be on your short list. Using a 4K mono LCD screen, the Sonic Mini 4K is capable of printing high resolution models with a per-layer cure time of just over 2 seconds per layer. This translates to high detail and high speed, but you’ll pay for it in the difference in cost between the Sonic Mini 4K and other MSLA 3D printers like the Anycubic Photon.
In our testing, we found the Sonic Mini 4K’s ability to produce fine features to be as-advertised, so printing table-top gaming miniatures and small sculptures is something this printer excels at. In addition to the high XY accuracy, the Z-stepping is barely visible even at a standard 50-micron layer height due to the software-enabled anti-aliasing provided by the ChituBox app.
Leveling the build platform on the Sonic Mini 4K was a little tricky, and the conflicting information provided by Phrozen can make the process intimidating for a first-time user. The quality of a print can depend heavily on the initial build platform calibration, so be prepared to spend some time getting this printer dialed in.
Do you want to print helmets, props and large pieces of cosplay armor – but you don’t want to slice them up into a jigsaw puzzle? Then the Anycubic Kobra Max is your dream machine. It has an enormous 400 x 400 x 450 mm build volume that can only be beat by the endless CR-30 belt printer.
Warning – this is a beast of a machine that needs three square feet of operating space. We had some trouble finding a good spot for it, because it was too big for our workshop counter. The Kobra Mas makes up for it’s gigantic footprint by being incredibly easy to assemble. It comes as a mostly assembled modular kit, and after placing a few bolts and screws, we had it unboxed and printing in about 30 minutes.
Available at $569, the Kobra Max pumps out smooth prints with the help of a Volcano-style hotend and dual gear extruder. The bed is carborundum coated glass that gets tacky when heated. It has excellent adhesion while hot and if you listen closely as it cools down you can actually hear the prints crackle as the glass releases it’s grip.
Giant beds like the one on the Kobra Max would be difficult to level by hand. Thankfully, Anycubic’s system makes it easy with a hard mounted bed and an auto leveling sensor built right into the hotend. The nozzle physically taps the glass surface to make a very accurate mesh – we only had to tweak the Z height to adjust for the difference in filament types.
The one significant fault on the Kobra Max is the lack of an included profile in Cura, leaving us to manually plug in dimensions and puzzle out the perfect settings. We feel that Anycubic’s suggestion to use Cura defaults moves the heavy print bed way too fast so we borrowed settings from a Creality CR10s profile and then got perfect prints.
The Elegoo Saturn is the counterpart to the smaller Elegoo Mars series of printers, which offer solid build quality for a reasonable price. The Saturn takes this formula to the extreme by offering a large 7.55 x 4.72 x 7.87-inch build volume while simultaneously increasing the resolution of the masking LCD. This, combined with the 2.5-second per-layer cure time from the Mono LCD, means that the Saturn can print more parts in the same amount of time as the smaller format Mars series of printers.
Elegoo has developed a two-bolt bed leveling solution for the Saturn that makes the leveling process a quick and painless process. This, combined with the native integration with the Chitubox slicer app, makes setting up and using the Saturn a simple process that is ideal for both beginners as well as experienced users.
The Saturn has a build volume of 280.46 cubic inches, a dramatic increase from the 100.81 cubic inch build volume of the smaller Elegoo Mars 2 Pro. If you’re looking for a resin printer that offers a large build volume but you don’t want to compromise with a lower quality print, the Saturn is an ideal solution but you might have to check Amazon several times before you can find one.
More: Elegoo Saturn Review
The Monoprice Cadet is a 3D printer designed from the ground-up with safety in mind and is ideal for a young beginner who is interested in getting started. The motion components are hidden internally in the frame and the heated nozzle is protected by a large metal grille, keeping curious fingers away from the parts of the printer that shouldn’t be touched during operation. The printer includes a bed-leveling probe which allows for touch-free automatic bed leveling, something a beginner will greatly benefit from.
As you would expect for a printer in this price range, the build volume is modest with a roughly 4-inch cube being the largest possible print. The build platform feels like an oversized fridge magnet, and parts detach quickly and easily without requiring hand tools.
The Cadet does have a few quirks to consider before you pull the trigger. For one, the side-mounted filament spool holder is mounted low on the printer, so most standard 1 kilogram filament spools won’t fit. You can mount 500g or smaller half-spools, or 3D print a filament stand to hold full spools. The Wi-Fi feature of the printer is also a little hit-or-miss; we were not able to get it to connect and several other users have noted the same issue online.