Power Supply Roundup: Part II
Enermax Modu 82+ 525 Watts
Enermax is jumping onto the energy-savings train, and has entered its 525 watt Modu82+ model into the race. The marketing name is designed to suggest greater efficiency to the customer: the reference to the 80Plus standard is surely not coincidental, and the Modu82+ does have this certification. But there is no 82Plus standard.
As the name suggests, this is a power supply with modular connection cables. The ATX connections and the CPU power are attached directly to the power supply. The sockets for PCIe as well as Molex and SATA are different, unlike the previous models we’ve seen, and cannot be confused. The connection cables are not compatible with the company’s older products.
The cooling of the power supply is handled by a 120 mm fan, with speed automatically regulated based on temperature. There is no manual setting, so you’ll have to trust that Enermax’s balance between noise and heat is acceptable The fan follow-up control used to protect the components, which you may have been familiar with from Enermax’s previous series is no longer included with the Modu82+.
Stay On the Cutting Edge: Get the Tom's Hardware Newsletter
Get Tom's Hardware's best news and in-depth reviews, straight to your inbox.
Current page: Enermax Modu 82+ 525 Watts
Prev Page Our Second Round Of Mainstream PSUs Next Page Enermax Modu 82+ 525 Watts (Continued)-
bf2gameplaya I use the Enermax Modu82+ 625W version (same design) and I can attest the 12v rails are rock solid, they just don't sag or dip under any load.Reply
The fan is interesting, I am used to the variable control knob but I do not miss it as the fan is silent under all but the heaviest sustained load and then it is audible, but not loud. It is a 120MM fan (quieter) but it is clear (louder). The fans' RPM monitoring lead is a must for my system board monitoring program as I could adjust other fans and settings based on the PSU fan RPM if I wanted, but as I run a near silent system, I have no need.
I wish it was $50 cheaper, but you get your money's worth, no mistaking that.
-
mafj Hi,Reply
I sill miss some bits.
I would like to see how overcurrent and overheat protection works, whether mains spikes can damage the power supply.
Whether joining +5V with +12V rail (as may happen when e.g. CDROM fails) will burn the other components.
And noise/heat level. -
bobbknight Yep just about as informative as the first part, IE. not very.Reply
Unless you put the thing under load and oscilloscope the outputs for ripple and open it up to see the type of parts used and the construction quality. reviews of this type are next to meaningless. -
jeffunit "But there is no 82Plus standard."Reply
Clearly these folks don't know about the different colors of the 80+
program. The enermax is rated at the bronze level which must be 82% efficient. There is also the silver and gold level rating.
google is your friend. -
jeffunit "For what it’s worth, that’s good enough to qualify the supply for the 80Plus Bronze certification, if Enermax pursued it."Reply
Not only did enermax pursue it, but if you go to 80plus.org, you will
see that they are already certified at the bronze level. (80plus.org is
down right now, or I would provide a url showing it.)
-
jeffunit If you go to enermax's site, http://www.enermaxusa.com/catalog/index.php?cPath=21_56Reply
they have a big honking picture of the 80+ bronze certificate and the 6 power supplies it applies to. I fear tomshardware has not done their homework.
Other than owning a 5 year old Enermax, I have nothing to do with the
company. I have 5 antec earthwatts powersupplies, and a seasonic power supply in my 80+ collection. -
jeffunit Listing "Confusing “82+” specification in the product name" as a negative, clearly shows where the confusion lies, and it isn't with enermax.Reply
The 80+ standard is several years old. The newer colored standards of bronze, silver, and gold are newer, but that is the wonder of technology.
For a technology web site, keeping up with newer things such as standards is necessary.