Skip to main content

Silverstone's New $500+ Behemoth Case

One of the selling points of the new Silverstone TJ11 full-ATX case, on display at Computex 2010, is that access panels would be supported by a solid, one-piece aluminum frame.

But the frame of the demo TJ11 was clearly made out of several pieces. The Silverstone rep quickly pointed however that the unit was simply a mockup, designed to show off component layout and fan placement. He assured us that the final production case would be as advertised, when it hits the market by the fourth quarter of 2010.

In any case, the TJ11 will feature the same unconventional motherboard placement as Silverstone's current flagship Raven. Motherboards mounted on this case will expose their back-plates to the top, instead of the usual rear.

Directly below the motherboard mount will be two of Silverstone's AP181 fans, advertised as a new case cooling solution that concentrates airflow better than your usual case fan. The two AP181s will suck air in from the side, then blast it upwards towards the motherboard's components. A cover-plate goes on top to keep things neat. Silverstone believes this setup encourage the hot air to evaporate up out of the case.

Also apparent from the TJ11 mockup was the high number of drive mounts. Aside from the nine 5.25" slots gracing the front, and three 2.5" slots hidden somewhere inside, there are six 3.5" mounts on the bottom of the case. The latter are oriented towards the side, on slide-out rails to facilitate drive installation. Directly behind these slide-mounts (on the opposite side in other words) are two smaller 120mm fans for cooling. Last but not least, there's space for the PSU below the AP181 duo.

We're not sure how well Silverstone's compartmentalized cooling setup will work, especially considering that the AP181s have to suck in air through a relatively small side opening. For sure it will take a little money to find out. The TJ11's projected price will be in the $500 to $600 range.  A figure totally justified according to the sales rep, to reflect Silverstone's provision of "its most advanced case construction and technology yet".

  • anamaniac
    For $500, they could have at least made it look decent...
    Reply
  • jacobdrj
    They totally need to make this case more expensive. Here is how: Add those Dyson bladeless fans to replace all the conventional ones in the case. At 200-300 bux a pop, this could quickly and efficiently increase the cost of this case, while minimally but still detectably improving its performance, slightly, at the same time...
    Reply
  • Ragnar-Kon
    Cool, but $500? Really!? I could build a decent machine for $500.

    Maybe if it was in the $120-$180 range, but $500.... no.
    Reply
  • Pillowy mounds of mashed potatoes...
    Reply
  • Luscious
    No case is worth that price if it cannot accommodate a quad radiator.
    Reply
  • jacobdrj
    Ragnar-KonCool, but $500? Really!? I could build a decent machine for $500.Maybe if it was in the $120-$180 range, but $500.... no.Nah, brah! You are missing the point. This is about being the best around. Nothings ever gonna keep it down. The best, around. Nothings ever gonna keep it down!
    Reply
  • jacobdrj
    They probably had to pay licensing fees to apple for the aluminum unibody design... Hence the $500 price tag...

    Because clearly this technology never invented by the auto industry to make aluminum engines for the Ford Taurus back in the 1980's... :rolleyes
    Reply
  • Sunburn74
    Too costly and not better than the FT02.

    As a case, the FT02 is absolutely perfect. (I own one btw)
    Reply
  • PC_GI
    I wonder how loud it is...
    Reply
  • Emperus
    A fourth quarter release date and 500$ price tag for something which more or less resembles a contemporary desktop full tower.! Why not integrate the case with one of the strider line PSU's.. That'll definitely crank up the hype and then even a 600$ price tag will sound worthy..
    Reply