Silverstone Precision Series PS12 Available This Month

Silverstone announced the release of the PS12 Precision Series mATX chassis. The PS12 features front access USB 3.0 ports and removable fan filter, ample space for hard drives, and clearance for graphics cards as long as 14.1 inches.

The PS12 is designed to be an affordable PC enclosure that doesn't sacrifice every possible feature. The case layout allows for up to four 3.5-inch hard drives to be installed along with a single SSD/2.5-inch drive. Silverstone also included two 5.25-inch bays for optical drives.

On the front of the case there are two USB 3.0 ports, headphone and microphone jacks, and large power and reset buttons next to LED indicator lights. The PS12 case also features a front access dust filter for the intake fans. Silverstone included one 12 cm intake fan, but there is space for an additional 80 mm fan below it for more airflow.

The case supports only mATX and mini-ITX motherboards and offers four rear expansion slots, but it has support for graphics cards just over 14 inches long by mounting the hard drives higher in the case. The design does limit the maximum width of the GPU (height from the PCI-e slot) to 5.7 inches, though.

Swipe to scroll horizontally
Model No.SST-PS12B
MaterialHigh-strength plastic and meshed front panel
MotherboardMicro-ATX, MINI-ITX
Drive BayExternal5.25" x 2
Internal3.5" x 4, 2.5” x 1
Cooling SystemFront1 x 120 mm intake fan included
1 x 80 mm fan slot
Rear1 x 80 mm/92 mm fan slot
SideOversized vents
Top--
Bottom--
Internal--
Expansion Slots4
Front I/O PortUSB 3.0 x 2
Audio x 1
MIC x 1
Power SupplyStandard PS2(ATX)
Expansion CardCompatible with expansion cards up to 14.1", width restriction-5.7"
Limitation of CPU cooler140 mm
Dimension170 mm (W) x 360 mm (H) x 405 mm (D), 24.78 liters
ExtraSupport Kensington locks

Silverstone said the Precision Series PS12 chassis will be available on November 25 with a suggested price of $45.

Follow Kevin Carbotte @pumcypuhoy. Follow us on Facebook, Google+, RSS, Twitter and YouTube.

 Kevin Carbotte is a contributing writer for Tom's Hardware who primarily covers VR and AR hardware. He has been writing for us for more than four years. 

  • RedJaron
    A basic but full-featured mATX case for only $45 is nothing to scoff. Looks like a very reasonable product.
    Reply
  • kcarbotte
    16943540 said:
    A basic but full-featured mATX case for only $45 is nothing to scoff. Looks like a very reasonable product.

    I hope my post didn't come off as scoffing the case.
    It does indeed looke like a decent case for the price.
    Reply
  • RedJaron
    Not at all, Kevin. Just saying I hope consumers don't overlook this because it's too bland or something like that. It's not the cheapest case, nor is it the flashiest. It looks like a good, basic case for a reasonable price. This is the exact kind of thing I would look for when building an SBM or a personal computer on a tight budget.
    Reply
  • kcarbotte
    16944163 said:
    Not at all, Kevin. Just saying I hope consumers don't overlook this because it's too bland or something like that. It's not the cheapest case, nor is it the flashiest. It looks like a good, basic case for a reasonable price. This is the exact kind of thing I would look for when building an SBM or a personal computer on a tight budget.

    If the previous iterating is any indication, your assessment in spot on.
    I built a computer for my uncle in the PS11
    Reply