RAID Scaling Charts, Part 2
Read Transfer Rates
The better your controller, the better it scales. In our testing, the Areca ARC-1220 is capable of benefiting from multiple hard drives in RAID 5 or RAID 6 setups. A single HD321KJ from Samsung provides up to 82 MB/s. A RAID 5 with three hard drives corresponds to a RAID 0 array with two hard drives, which is why a three-drive setup practically doubles the performance of a single drive. Adding more hard drives adds considerably more throughput with each additional drive, but the test system starts to max out with six hard drives, reaching 356 MB/s. Eight drives will only give you slightly more performance, with a data transfer rate of 384 MB/s.
Write Transfer Rates
Parity calculation takes time. This becomes very obvious when looking at the write performance results. While read transfer rates of almost 400 MB/s were possible, RAID 5 setups with multiple drives did not even achieve half of that. For RAID 6 setups, the maximum write transfer rates were less than 150 MB/s with eight hard drives. It is, however, very interesting to see that the minimum transfer rates clearly benefit from a higher drive count, although the maximum value doesn’t differ much between three and eight drives (RAID 5). Clearly, the controller cannot process more XOR data.
Stay on the Cutting Edge
Join the experts who read Tom's Hardware for the inside track on enthusiast PC tech news — and have for over 25 years. We'll send breaking news and in-depth reviews of CPUs, GPUs, AI, maker hardware and more straight to your inbox.