SilverStone Precision PS05B
Also called the PS05-B by Newegg and the SST-PS05B on SilverStone’s description page, the PS05B appears to take many of its design cues from the spacecraft of science-fiction movies.
Primary features include a port panel and removable fan cover on the PS50B’s top panel. The design means that this case is destined not for above or below a desk, but beside it.
A peek around back is a little more revealing, as the PS05B has the same rear-panel design (right down to the millimeter) as AeroCool’s VX-R. That includes the two 3/8” coolant line holes, which can be opened to 1.1” (for grommets) by knocking out the two rings that surround these holes. Like AeroCool, SilverStone cuts cost by not including these inexpensive parts.
Of course, tracking down these parts aftermarket is far more difficult. That fact makes the exclusion of grommets by both SilverStone and AeroCool a bit frustrating.
Current page: SilverStone Precision PS05BPrev Page Building With The Challenger Next Page Inside The PS05B
Stay on the Cutting Edge
Join the experts who read Tom's Hardware for the inside track on enthusiast PC tech news — and have for over 25 years. We'll send breaking news and in-depth reviews of CPUs, GPUs, AI, maker hardware and more straight to your inbox.
OpenAI leadership rejects Elon Musk lawsuit – memo seen by reporters rebuts three main claims point by point
Hands-on with Corsair's 2500D Airflow case: Roomy at the back, for rear-connector motherboard cables
Cura Fuzzy Skin Feature: How to Use it to Add a Textured Surface on 3D Prints
The Antec 300 is the only case in the roundup that doesnt look and feel like your buying a cheap ass case. It is well worth the extra money and I dont think anyone should really consider building with anything less.Reply
stm1185The Antec 300 is the only case in the roundup that doesnt look and feel like your buying a cheap ass case. It is well worth the extra money and I dont think anyone should really consider building with anything less.Reply
Have you actually used an Antec 300? The quality is only average. Plus it lacks a lot of features that all the others have. Seems pretty cheap ass to me.
Note I've used one Antec 300 and two Rosewill Challengers in different builds. Quality wise I would put them pretty close, the Antec 300's paint finish is like sand paper, where the Challenger is smooth, however the Antec 300 has slightly thicker metal. Feature-wise, its no comparison, and everyone who saw them together preferred the challenger.
Nice review Tom's. Hopefully you will move on to some more gamer class cases ($50-$100).
Awesome article toms. Appreciate it :DReply
"Rosewill destroyed NZXT’s value leadership goals by putting a greater number of fans in an otherwise-similar chassis at the same price."Reply
Except that the NZXT gamma costs $7 less shipped (current and suggested prices) and has for a while now.
I hope the HAF 912 get reviewed and compared. And centurion 590... but that is old and tom's did something with it a while agoReply
I love my NZXT Gamma (mostly cos no floppy slot and mate finish), although as mentioned, u need to buy fans, 6 fan slots but only 1 included.Reply
Its pretty cool how cheap cases nowadays can top cases like the Antec 900 in some aspects.Reply
no offense to anyone who owns one of these cases, but all four of those cases are really ugly. All but the rosewill looks like a busted up autobot.Reply
Well, you showed us 4 cases, but truly just two designs. The NZXT and Rosewill are almost identical, while the AeroCool and Silverstone are as well. You could have paired each general design together and pointed out their subtle differences simultaneously.Reply
If I were truly on a tight budget, I might consider one of these designs. But, it's easily argued that there are higher quality and more feature-rich cases (that don't cut any corners like grommets, fans, filters, etc.) within a $20-$30 earshot of these.
I love my Gamma because I got it for $35 with a $25 MIR(which I received). Can't complain about a $10 dollar case, eat it 300!Reply