Skip to main content

Noctua & Thermaltake to Offer Free LGA-2011 Mounting Kit

If you look at the differences between the LGA-2011 and LGA-1366 socket, the first thing you see is the lack of mounting holes on the LGA-2011 motherboard. On current gen Intel motherboards, the CPU cooler mounting bracket passes through the motherboard and is retained by either push-pins or variations of backplates and mounting screws. The LGA-2011 socket will utilize the CPU retention bracket for the mounting of the CPU cooler through threaded tabs. These changes will required users to make a switch to a new bracket for mounting their coolers on the new LGA-2011 socket. 

Thermaltake

Thermaltake and Noctua are offering a free mounting kit upgrade for the LGA-2011 socket. There are specific requirements that each manufacturer requires the users to meet for the upgrade on selected CPU coolers.

Thermaltake:

Terms and Conditions:

  •  FreeUp product will be shipped shortly after launch of the LGA 2011 processor
  •  FreeUp eligibility requires proof of purchase of: a. Qualified Thermaltake LGA 2011 compatible cooling solution b. LGA-2011 compatible motherboard or processor
  •  FreeUp product can take up to 2 weeks for shipping depending upon location
  •  Qualified Thermaltake product must be purchased on or after September 1st 2011 to qualify for the FreeUp program
  •  The Thermaltake FreeUp Program is only available for customers in North America.

 

Intel LGA-2011 compatible coolers:

  • Thermaltake Bigwater 760 Plus
  • Thermaltake Frio OCK
  • Thermaltake Frio
  • Thermaltake Contac 30

Noctua: The NM-I2011 SecuFirm2 mounting kit

Terms and Conditions:

  • Delivery may take up to 2 weeks depending on your destination.
  • The Noctua NM-I2011 SecuFirm2™ Mounting-Kit is also available for purchase at a list of resellers. If you need the kit urgently, please consider ordering it via a local reseller.
  • We strictly require a valid proof of purchase (scan, photo or screenshot of the invoice) of both a Noctua CPU cooler and either a LGA2011 mainboard or LGA2011 CPU in order to process your request. In case you've lost the invoice of your Noctua CPU cooler, please upload a photo of the cooler next to an ID card (passport, driver's licence, etc.) as proof of purchase. Please note that your name has to be clearly readable and that we can't process requests without proper proof of purchase.

 

Intel LGA-2011 compatible coolers:

  • All Noctua CPU coolers since 2005

Noctua LGA-2011

Noctua LGA-2011

To get your free mounting kit upgrade, visit Thermaltake's and Noctua's respective product pages.

  • jdamon113
    That is awesome now can we stop changing or adding ziffs
    Reply
  • belardo
    No. Added pins are needed for more data bandwidth. Which adds costs and complexity to the board and CPU.

    They cannot plan 5 years into the future their socket requirements.

    AMD's big plus is that they retain their socket standards for a LONG time.
    AM3 socket has been around since the Core i357? series from 2+ years ago and is using AMD latest so-so CPUs. Intel will has 4 sockets changes since then...

    But then again, AMD is shipping FM1 Sockets for current Fusion A CPUs... but in 2013, FM2 will replace both FM1 and AM3+ sockets.
    Reply
  • iam2thecrowe
    belardoNo. Added pins are needed for more data bandwidth.BS, they need more pins for data bandwidth like a gt210 needs pcie3 for more data bandwidth.
    Reply
  • johnners2981
    "The Thermaltake FreeUp Program is only available for customers in North America"
    Don't think I'll buy thermaltake anymore, they is showing me no love :(
    Reply
  • jprahman
    I'm not too crazy about this new mounting scheme. I mean all that's holding onto a heavy heatsink is a set of tabs that attach to the retention plate. I liked the old backplate style better, feels more solid.
    Reply
  • Filiprino
    This isn't new for Noctua. They've offered free mounting kits for their previous LGA775 coolers if you wanted to use them on LGA1156 or LGA1366.
    Reply
  • hetneo
    iam2thecroweBS, they need more pins for data bandwidth like a gt210 needs pcie3 for more data bandwidth.BS you didn't hear that Intel is switching from DMI to QPI on LGA 2011. And now you are proly wondering wtf am I talking about.
    Reply
  • hetneo
    Well tbh I hope that LGA2011 has some type of reinforcements under it self
    Reply
  • cmadrid
    The motherboard previews I've seen (admittedly only a few) look like they have a built in backplate now
    Reply
  • belardo
    Changing sockets... a great way to force customers to replace motherboards AND CPUs.
    Reply