Skip to main content

SAS Cables: Everything you Wanted to Know is at Uniconn Booth

Do you remember how easy it was to understand cabling for ATA and SCSI some 5 years ago? There was the 40-pin ATA ribbon cable (80-pin UltraATA) and a limited selection of internal and external SCSI cables. Those buses required termination to avoid signal reflection, and devices had to be assigned a unique ID. ATA only differentiated between master and slave devices.

Despite being much simpler, SAS and SATA (Serial Attached SCSI and Serial ATA) have increased the number of necessary cables, as there are many more applications possible with these point to point interfaces today. Uniconn Corporation offers all of them and despite not having a large booth, they present the entire lineup of SAS and high-bandwidth cables required in many businesses and enterprises today.

If you are familiar with today’s storage applications and only some of the connector types available, you will get an excellent overview by looking at the photos we took.

Image 1 of 2

SFF8470 SAS Cables

Image 2 of 2

SFF8087 and SFF8088 MiniSAS

  • gwolfman
    the 4x female internal cable assy could be useful :) oh, and the braided 4x mini sas connectors
    Reply
  • techcable
    Another confusing thing about SAS cables is the wiring. The wiring is flipped in some cables, so you need to know your controller/target set-up. See http://www.techcable.com/HTML/SAS.htm
    Reply