$500 fiber optic HDMI cable delivers flawless 48 Gbps performance across a staggering 990 feet — crushes 8K at 60 Hz and 4K at 120 Hz over long distances

Fiber optic HDMI cable with detachable ends
(Image credit: Ben Geskin on X)

Ultra-expensive cables positioned as a miracle cure have been around forever. Most of these are obviously shams, but some are actually really worth the price, such as those that use fiber optics. Cables ditching copper wires to improve signal integrity are not exactly rare, but they were a new discovery for this Twitter user, who got their hands on an $116 fiber-optic HDMI cable from Ruipro with detachable ends.

The X post below went viral, garnering almost a million views for what seems like a perfectly ordinary product. Be that as it may, most people don’t actually care for, or even know, tech specs off the top of their head, especially when it comes to confusing standards like HDMI. What we’re looking at here is an active optical cable (AOC), which carries its signal over fiber optics instead of traditional copper wiring.

It’s called “active” because there’s a signal conversion taking place inside the cable, where electrical HDMI signals are converted into optical signals between the two ends. The cable isn’t entirely devoid of copper wires; some are still used for low-priority communication and power, but the majority of the signal is carried via fiber optic strands. This allows for significantly longer cables that can travel long distances without degradation.

Article continues below

Because this is an HDMI 2.1 cable in the post, it's capable of 8K output at 60 Hz, or 4K at 120 Hz without DSC, and supports 10-bit HDR. It's a full-fat 48 Gbps cable, which isn't always guaranteed, given how loose the HDMI Forum is with its branding. In fact, this is why people often buy overpriced cables: to circumvent the marketing red tape and get the best possible option that'll cover all their needs.

Now, these specs aren't special in a vacuum, but the fact that the cable can enable them over (up to) 990 feet — that's the impressive bit. The "entry-level" $116 version is only 3 feet long, and for that, it's quite expensive because you don't need fiber optic for this length. The best deal here is probably the 100-foot cable priced at $150, so only about $30 more for an extra 97 feet of fiber-optic goodness.

Ruipro has made the HDMI connectors on both ends removable, so you won't have to replace the entire cable if a plug breaks. When removed, the end of the cable can slot into keystone jacks and wall plates as well for easy storage. The cable itself is relatively thin for its size, and the connectors are made entirely of metal to ensure durability.

Another benefit of fiber optic is its resistance to electromagnetic interference, though that's not a huge issue to begin with for HDMI, and EMI is notoriously used as the bait to sell those aforementioned miracle cures. Regardless, this is still a solid HDMI 2.1 cable for those who value signal integrity, and even though the starting price is certainly not enticing, the subsequent options are priced rather fairly.

Google Preferred Source

Follow Tom's Hardware on Google News, or add us as a preferred source, to get our latest news, analysis, & reviews in your feeds.

TOPICS
Hassam Nasir
Contributing Writer

Hassam Nasir is a die-hard hardware enthusiast with years of experience as a tech editor and writer, focusing on detailed CPU comparisons and general hardware news. When he’s not working, you’ll find him bending tubes for his ever-evolving custom water-loop gaming rig or benchmarking the latest CPUs and GPUs just for fun.

  • Spuwho
    It's not the fiber that is special, its the transceivers in those dongles that are driving the price. Probably HDMI over 100GbE.
    Reply
  • Stomx
    Fiber optic HDMI is indeed great. I'm missing very much USB3/USB4 over fiber optic, nobody makes ones. Existing USB3 cables are total disaster, very thick, need re-translators every few meters, barely succeed to work for 20-30m distances. Optical one would easily transmit even USB5 over the fiber and would also need couple standard wires to supply 5V (which better upconvert to 24V and downconvert back to 5V in the final dongle)
    Reply
  • -Fran-
    Is there a mention to increase latency?

    Since this is digital to digital, there has to be a penalty?

    Regards,
    Reply
  • Crawdadius
    I've been using one of these to connect my gaming PC in the office to my TV in the living room about 60 feet away. It works great. I'm able to take advantage of all the fancy features of my TV. 4K, 120Hz, HDR, VRR and 5.1 channel audio all working as expected without any perceptible latency.

    Another major advantage is that you can pull this MPO Fiber cable once and then in the future when new HDMI or Displayport standards are released, you can (hopefully) just upgrade the transceiver at each end without having to pull another cable.

    To get some usable USB ports out in the living room I found a USB over CAT6 extender kit from AV Access for about $60. This supports USB 2.0 up to ~200 feet. This lets me plug in a wireless keyboard, Bluetooth dongle and Xbox controller wireless adapter so I can pair controllers easily.

    This setup has been super reliable. I use it every day and I'd recommend it to anybody who wants their beefy gaming rig to pull double-duty for console-like couch gaming.
    Reply
  • ferdnyc
    (From the article): "The cable isn’t entirely devoid of copper wires; some are still used for low-priority communication and power, but the majority of the signal is carried via fiber optic strands."

    Incorrect. Ruipro do offer "hybrid" fiber-optic cables too, but this is not one of them. The packaging explicitly characterizes it as a "pure fiber optic" cable, as it uses no copper outside of the transceiver heads.
    Reply
  • spoidz
    How flexible would this cable be? For instance at the point where it has to bend from the attic down through the wall to a floor level connection plate or out of the wall?

    Does it have to be in a protective case/channel if I want to just run it along the floorboard or under or does it need protection in an unheated attic during winter?
    Reply
  • jp7189
    Having had direct experience with ruipro, I can say I'm pretty impressed. There was a slip of paper in the box with the signal test results of my cable which speaks to attention to detail.

    Also, in the early days of the RTX 3080 (which was notorious for hdmi issues), I asked some simple questions of ruipro customer service to try to figure out where the signal dropouts were coming from and they sent a brand new cable no questions asked to help rule that out as a problem. The problem wasn't the cable, it was the card. In any case, thats the kind of customer service that makes lifelong customers.
    Reply
  • stuff and nonesense
    -Fran- said:
    Is there a mention to increase latency?

    Since this is digital to digital, there has to be a penalty?

    Regards,
    Over a distance of approx 300m .. negligible

    1.5 microseconds at 200,000,000 meters per second (less for the speed of light in a vacuum)
    Reply
  • Crawdadius
    spoidz said:
    How flexible would this cable be? For instance at the point where it has to bend from the attic down through the wall to a floor level connection plate or out of the wall?

    Does it have to be in a protective case/channel if I want to just run it along the floorboard or under or does it need protection in an unheated attic during winter?
    It is a standard MPO, Type A OM3 multimode fiber cable, common in data center applications. It is a little unusual that it's listed as a "7-core" cable on their website. Usually you see 8, 12, 16, or 24 strand MPO fiber cables. A general rule is that the minimum bend radius you want with fiber like this is 10x the outer diameter of the cable itself. I just measured mine and it's ~3mm thick, so I'd be pretty confident that it would work fine with a 3cm bend in the run. Basically I'd treat it the same as CAT6. Don't kink it, but if you're confident pulling CAT6 around a bend, then it shouldn't pose any issue with this fiber.

    Also - the fiber provided by RUIPRO has an armored sheath for added durability. Definitely fine to tuck along the floorboard or leave unprotected in your attic or in your walls. They're more durable than you'd think, but I still try to be as gentle as I can when I'm pulling and avoid stepping on it.. I ran this across the basement ceiling in my house and pulled it up through the wall behind my TV. I have a pretty packed conduit behind the TV so it took some serious tugging but it didn't damage the fiber in any way.
    Reply
  • Stomx
    Crawdadius said:
    They're more durable than you'd think, but I still try to be as gentle as I can when I'm pulling and avoid stepping on it..
    I use different brand fiber - iBirdie - for few years already, it is lying on hard floor and carpet, all stepping on it, so far no problem (lazy to hide it inside the walls. Will probably move it close to baseboard eventually)
    Reply