Terratec's Aureon 7.1 FireWire Attempts Plug-and-Play with Pro Sound Card Performance
Behavior At 24 Bits/96 KHz
Operation at 96 kHz offers improved performance in certain areas and a slight (but very slight) deterioration in others. This is fairly logical behavior, since increasing bandwidth is not always totally advantageous. In any case, the results were excellent for a card of this type.
Frequency response (20 Hz - 20 kHz) | +0.03, -0.41 dB |
Weighted signal-to-noise ratio | 103.2 dB(A) |
Distortion | 0.0069% |
Stereo crosstalk | 102.5 dB |
Frequency response : No change in reproduction of the audio spectrum. The grade remains "very good."
Noise level : Noise becomes very low at this level and equivalent to that of the best mass-market sound cards.
Dynamic capacity : The dynamic capacity decreases in relation to 48 kHz, which seems to offer the best compromise.
Distortion : Despite figures that were not quite as good, the result is very comparable to that achieved at 48 kHz.
Intermodulation : Here again, there is a slight deterioration in comparison with performance at 48 kHz but the result remained very good.
Stereo separation : This leaps the 100 dB barrier. In other words, you have nothing to worry about as far as diaphony is concerned.
Stay on the Cutting Edge
Join the experts who read Tom's Hardware for the inside track on enthusiast PC tech news — and have for over 25 years. We'll send breaking news and in-depth reviews of CPUs, GPUs, AI, maker hardware and more straight to your inbox.
The phono input is a very interesting addition because it proves to be fully usable. The RIAA correction is pretty good so noise is very faint, much less than is usual when playing a vinyl disk. So there are no worries on that point.
Current page: Behavior At 24 Bits/96 KHz
Prev Page Behavior At 24 Bits/48 KHz Next Page Games And 3D