Skip to main content

Monoprice Dark Matter 27-inch 240 Hz Monitor Review: Cheap Fun, Solid Accuracy

A 240 Hz gaming monitor doesn’t have to cost a lot.

Monoprice Dark Matter 27
(Image: © Monoprice)

Our HDR benchmarking uses Portrait Displays’ Calman software. To learn about our HDR testing, see our breakdown of how we test PC monitors.

To engage the Dark Matter 27’s HDR mode, apply an HDR10 signal, then switch on HDR in the Gaming Setup menu. Note that the BenQ XL2546K doesn’t support HDR so it has been left out of this section of the review.

HDR Brightness and Contrast

Image 1 of 3

Monoprice Dark Matter

(Image credit: Tom's Hardware)
Image 2 of 3

Monoprice Dark Matter

(Image credit: Tom's Hardware)
Image 3 of 3

Monoprice Dark Matter

(Image credit: Tom's Hardware)

You can see that the Monoprice is quite a bit brighter than the Pixio, further highlighting the differences between the two displays. At over 522 nits, it’s one of the brighter HDR monitors we’ve tested. It doesn’t carry any certifications from VESA, but it obviously qualifies for DisplayHDR 400 capability.

With no dynamic contrast available, there isn’t any more dynamic range for HDR material but that is true of all the monitors here. Obviously, the AOC has an advantage, but it too does not expand its contrast for HDR. In the realm of budget HDR monitors, the Dark Matter 27 delivers average HDR contrast but its extra brightness may appeal to some users.

Grayscale, EOTF and Color

Image 1 of 2

Monoprice Dark Matter

(Image credit: Portrait Displays Calman)
Image 2 of 2

Monoprice Dark Matter

(Image credit: Portrait Displays Calman)

The Dark Matter 27’s HDR mode locks out all image controls but that doesn’t prevent it from delivering very accurate HDR color. It’s better than the default SDR mode in fact. Grayscale appears slightly blue in the chart, but the actual error is invisible.

The EOTF curve rises a bit too quickly and transitions to tone mapping about 10% too early. That will raise midtone brightness a little but most content won’t show a problem. We also observed a rise in black levels at the extreme dark end of the scale, but this too is a minor issue. Overall, the image has the same contrast for SDR and HDR, but the latter picture is brighter since the backlight is at its maximum level.

Christian Eberle
Christian Eberle is a Contributing Editor for Tom's Hardware US. He's a veteran reviewer of A/V equipment, specializing in monitors.